Main features of Multi Copper Drawing machine:
Muti (8 wires)wire drawing machine with annealer is used to drawing Φ0.1-0.8mm. Easy to maintain, simple to operate and low noise, high efficiency.
Multi Copper Drawing machine Components :
1. Bobbin or Coiler pay-off
2. Main drawing machine
3. Continuous annealer machine
4. Tension control device
5. Dual-spooler automatic take-up or single bobbin automatic take up
6. Electric control system
7. Gearbox lubrication system
8. Drawing liquid supplying system
9. Annealing water supplying system
10. Pointing and threading machine
11. Steam generator
Technical Parameters of Multi Copper Drawing machine:
Inlet diameter(tensile strength) | : Max. 8*1.80mm (250N/mm2) for finish 0.40mm |
Outlet diameter | Φ0.15-Φ0.40mm |
Number of Dies | : 8*21 |
Max Line speed | : 1800m/min |
Drawing capstan | : zirconium oxide porcelain |
Slip of ratio of m/c | : 20%+16% |
Take up Bobbin | :DIN 630/500 ( Or according to customer |
Noise level | :< 85 dbA (Except for main motor ) AC Motor |
Main motor power | 90kw |
Fix capstan diameter | 100mm with 8 grooves |
Max. Annealing voltage | DC 60V |
Max annealing current | DC1200 |
