Power Saving High Speed Injection Molding Machine for PP syringe
Enviromental protection-high energy saving
High performance energy saving result realized the reduction of cost
Not only save energy, but also realized the precise speed and pressure control
High efficiency, lower oil temperature ,make oil talk much smaller, extend the use of hydraulic oil and elements
HIGH ENERGY SAVINGS
Under normal operating conditions,compared with conventional hydraulic injection molding machines,energy saving of 20-80% can be achieved.
MOLDING STABILITY
Compared with conventional injection molding machines,repeatability is greatly improved due to ervo motor closed-loop control
QUICK RESPONSE
Featuring a dynamic servo motor with a response time of only 0.05sec
QUIET OPERATION
Machine runs much lower noise levels, particularly in low speed applications
RELIABLE HOLDING PRESSURE
Compared with traditional hydraulic machine,the holding pressure is more stable and does not have limitation
BETTER OIL TEMPERATRURE STABILITY
The servo system only delivers hydraulic oil as it is needed for the various functions,This prevents unnecessary generation of heat and substantially reduces oil cooling requirements.
SPECIFICATION | ||||
MODEL | ||||
Description | UNIT | K3-100 | ||
INJECTION UNIT | ||||
Shot volume | Cm³ | 141 | 178 | 220 |
Shot weight(ps) | g | 129 | 164 | 202 |
Shot weight(ps) | Oz | 4 | 5.8 | 7.1 |
Screw diameter | mm | 32 | 36 | 40 |
Injection pressure | Mpa | 249 | 196 | 159 |
Injection rate | g/sec | 60 | 87 | 107 |
ScrewL/D ratio | 23.6 | 21 | 19 | |
Screw stroke | mm | 175 | ||
Screw speed(stepless) | Rpm | 0214 | ||
Nozzle contact force | ton | 3.5 | ||
Clamping force | ton | 100 | ||
Opening stroke | mm | 350 | ||
Platen size | mmxmm | 550X550 | ||
Space between tie bars | mmxmm | 375X375 | ||
Max.daylight | mm | 750 | ||
Mold thickness(min.-max.) | mm | 150-400 | ||
Hydraulic ejection stroke | mm | 11
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|