600Ton Variable Pump Injection Molding Machine with Double oil tank
Selling points
- Adopt 38CrmoAla Material for key in toogle part.more endurable in using.other supplier may use 40CR or 45# Steel
- Double oil tank design:because short the distance for the oil return line ,the hydraulic system response is getting more quicker. In the meantime,this design will reduce the oil temperaure ,protect the oil seal.
- Using bridge design for the injection unit,avoid material leakage if the injection unit is not stay in the same level.
- Adopt double injection cylinder ,more faster and powerful.avoid any injection less or injection not in the center by single injection cylinder
SPECIFICATIONS
SPECIFICATIONS | ||||
DESCRIPTION | UNIT | K2-650 | ||
INJECTION | A | B | C | |
SHOT VOLUME | CM3 | 2160 | 2734 | 3376 |
SHOT WEIGHT | G | 1966 | 2488 | 3072 |
(PS) | OZ | 68.8 | 87.1 | 107.5 |
SCREW DIAMETER | MM | 80 | 90 | 100 |
INJECTION PRESSURE | MPA | 215 | 170 | 138 |
SCREW L:D RATIO | 21:1 | 21:1 | 19:1 | |
SCREW STROKE | MM | 430 | ||
SCREW SPEED (STEPLESS) | R/MIN | 0~125 | ||
CLAMPING UNIT | ||||
CLAMPING FORCE | KN | 6500 | ||
OPENING STROKE | MM | 920 | ||
PLATEN SIZE | MM*MM | 1320*1290 | ||
SPACE BETWEEN TIE BARS | MM*MM | 930*900 | ||
MOLD THICKNESS (MIN-MAX) | MM | 350~910 | ||
MAX.DAYLIGHT | MM | 1830 | ||
HYDRAULIC EJECTION STROKE | MM | 265 | ||
HYDRAULIC EJECTION FORCE | KN | 182 | ||
POWER UNIT | ||||
HYDRAULIC SYSTEM PRESSURE | MPA | 17.5 | ||
PUMP MOTOR(V/S) | KW | 55/2*28.3 | ||
HEATING CAPACITY |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|