Semicircle Sink Forming Machine
A. Technical Specification
1. Profile
2. Components of line:
No. |
Name |
Unit |
Qty |
1 |
3T passive Decoiler |
set |
1 |
2 |
Main Machine For Roll Forming |
set |
1 |
3 |
PLC Control System |
set |
1 |
4 |
Hydraulic System |
set |
1 |
5 |
Run out Table |
set |
2 |
3. Technical specifications
(1)Decoiler
Decoiler: umbrella type, passive feeding, manual tensing
Bearing weight: 3 Tons
(2)Main forming machine
(The quoted machine has been adapted to your special requirements as well as to your specification. Photos of machines are for example only.)
Technical parameter:
- Rolling product specification (mm) : 450×(0.4-0.5)×L Zinc/aluminum alloy plate
- Forming speed:0-15m/min
- Forming stations:20 stands and a series of auxiliary roller
- Roller material:NO.45 steel with surface chromium plating processing
- Main shaft material: NO.45 steel with treatment
- Main shaft diameter: 70 mm
- Main power: 5.5 KW
- Driving mode: the chain transmission
- Hydraulic station power: 3 KW
- The pressure of the hydraulic pressure station: 10 ~ 12 Mpa
- Cutting: the hydraulic pressure drive, cut down after forming
- Cut to length, 10m±2mm
- Electrical control system: the whole machine adopts industrial computer PLC variable frequency control
(3)PLC control system
(4)Hydraulic system
(5)Output table
4. Flow Chart
Put coils ----- leveling ----- roll forming ----- cutting after forming ----- output products