Semicircle Sink Forming Machine
A. Technical Specification
1. Profile
2. Technical parameter:
- Rolling product specification (mm) : 450×(0.4-0.5)×L Zinc/aluminum alloy plate
- Forming speed:0-15m/min
- Forming stations:20 stands and a series of auxiliary roller
- Roller material:NO.45 steel with surface chromium plating processing
- Main shaft material: NO.45 steel with treatment
- Main shaft diameter: 70 mm
- Main power: 5.5 KW
- Driving mode: the chain transmission
- Hydraulic station power: 3 KW
- The pressure of the hydraulic pressure station: 10 ~ 12 Mpa
- Cutting: the hydraulic pressure drive, cut down after forming
- Cut to length, 10m±2mm
- Electrical control system: the whole machine adopts industrial computer PLC variable frequency control
3. Components of line:
|
No. |
Name |
Unit |
Qty |
|
1 |
3T passive Decoiler |
set |
1 |
|
2 |
Main Machine For Roll Forming |
set |
1 |
|
3 |
PLC Control System |
set |
1 |
|
4 |
Hydraulic System |
set |
1 |
|
5 |
Run out Table |
set |
2 |
4. Technical specifications
(1)Decoiler
Decoiler: umbrella type, passive feeding, manual tensing
Bearing weight: 3 Tons
(2)Main forming machine
(The quoted machine has been adapted to your special requirements as well as to your specification. Photos of machines are for example only.)
4. Flow Chart
Put coils ----- leveling ----- roll forming ----- cutting after forming ----- output products
