5. Desilter
A hydrocyclone much like a desander except that its design incorporates a greater number of smaller cones.
As with the desander, its purpose is to remove unwanted solids from the mud system. The smaller cones allow the desilter to efficiently remove smaller diameter drill solids
than a desander does. For that reason, the desilter is located downstream from the desander in the surface mud system.
| Drive Principle | Solids dispersed via centrifugal force, particles Underflow, the small particles Overflow |
| Drive Effect | The volume stored in the Mud Sand Trap Tank Management |
| Component | Separator, Valve, Pipe ect. |
Specification table of Desilter (Woomin technology)
| Model | WMDESAN500 | WMDESAN1000 | WMDESAN1500 |
| Treating Capacity | 500GPM | 1000GPM | 1500GPM |
| Cone Size | 4 inch | 4 inch | 4 inch |
| Cone Number | 8 Each | 12 Each | 16 Each |
| Pressure | 0.25 ~ 0.4 Mpa | ||
| Matching Pump | 30 / 37 Kw | 45 / 55 Kw | 55 / 75 Kw |
| Separation | 15 ~ 25 microns | ||
| Inlet Size | 6 inch | 6 inch | 6 inch |
| Outlet Size | 8 inch | 8 inch | 8 inch |
| Dimension | 1880 x 1000 x 1600mm | 1880 x 1000 x 1600mm | 1880 x 1000 x 1600mm |
| Weight | 565kg | 590kg | 615kg |
Equipment Series of Mud Treatment System
