50W 1-10V Push dimmig led driver output current 350mA-1050mA selectable 123x79x23.5mm
Description:
1.Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA. Also, the LED driver supply 12Vdc / 24Vdc output voltage for you selection.
2, with top circuit design AC-DC-DC, no flicckering in dimming 0%-100%
3,1-10V and push is selectable. And the primary push is always active
4, Dimming mode easily switched by Jumper1,Jumper2, Jumper3
5, Primary and secondary dimming with PUSH button.
6, Secondary dimming with 1-10V dimmer.
7, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
8, Maximum length of the cable, from push button to last driver is 20m
9. No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
10, Protection: Short circuit / Over voltage / Over temperature
11, Press-in terminals in primary and secondary side, easy assembly
12, 5 years guaranty
Specifications
|
INPUT
|
Input voltage |
220-240Vac |
|
Input frequency |
50-60Hz |
|
|
Input current |
0.26A max |
|
|
Power factor |
≥0.90 |
|
|
Efficiency(Note1) |
≥87% |
|
|
Leakage current |
0.5mA/240Vac |
|
|
OUTPUT
|
Output current/voltage and load |
350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC, 50W max |
|
Output load range |
1x50W max |
|
|
Current accuracy |
±5% |
|
|
Dimming mode |
1-10V, PUSH |
|
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50 |
|
Surface temp.(Tc) |
85max |
|
|
Working humidity |
20~90%RH non-condensing |
|
|
Storage temp. |
-40~80 |
|
|
Life time |
≥50000hours |
|
|
PROTECTION
|
Isolation class |
Class I, SELV |
|
Protection class |
IP20 |
|
|
Short circuit |
Protection type; auto rest |
|
|
Over voltage |
Protection type; auto rest |
|
|
Over temperature |
Protection type; auto rest |
|
|
SAFETY&EMC
|
Safety |
EN61347-1 EN61347-2-13 EN60598-1 EN60598-2-6 |
|
EMC |
EN55015, EN61000-3-2ClassC |
|
|
EN61000-3-3, EN61547 |
||
|
Approvals |
SEMKO, CE |
|
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min; IN-FG:1500VAC/5mA/1min |
|
|
OUT-FG:500VAC/5mA/1min |
||
|
NOTE |
1, Efficiency is measured at 1050mA/48Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp. |
|
Mechanical Specification:
Dimming Operation:
1-10V Dim
PUSH Dim
Primary push
Secondary push:
Wring Diagram:
