WD-1800×(0.5-3.0) Hydraulic Precision Slitting line
Specifications:
1. in-diameter:φ550mm
2. out-diameter:≤φ1600mm
3. coiled product weight:≤25t
4. slitting capability:
46 lines(when plate thickness 0.5mm)
35 lines (when plate thickness 0.8mm)
20 lines(when plate thickness 1.01mm—2.0mm)
10 lines(when plate thickness 2.0mm, SS materials are201,202)
8 lines(when plate thickness 2.01mm—3.0mm)
5. Width Tolerance:
±0.05mm(when thickness 0.5mm—1.0mm)
±0.08mm(when plate thickness1.01mm—2.0mm)
±0.10mm(when plate thickness 2.01mm—3.0mm)
Note:when using new blade or after sharpening,parallelism and verticality≤0.005mm, as width of slitting plate is 1500mm-1800mm and JIS standard steel coil in 200T)
6. one side sliver width:
≥3mm(when plate thickness0.5mm-3.0mm)
7. Two sides should have slivers
8. Straightness:≤1mm/m(certified/JIS standard steel coil)
9. rolled territory:≤5mm/m(certified/JIS standard steel coil)
equipment composition:
- Hydraulic loading trolley 1set
- single-cantilever hydraulic expansion/contraction material hanging uncoiled 1set
- material hanging support 1set
- automatic hydraulic pressure driving feeding machine 1set
- leading terminal and shoveling terminal 1set
- traction pinch initial correction machine 1set
- steel strip head/tail shearing machine 1set
- front looper pallet rack(looper pit) 1set
- center directing and correcting device 1set
- slitting host machine 1set
- sliver rolling machine 2set
- transitive material guide rack 1set
- back looper pallet rack(looper pit) 1set
- Pre-sub/pressing materials tension damping device 1set
- Hydraulic slitting pressing device 1set
- rolling host machine 1set
- rolling support 1set
- Hydraulic unloading trolley 1set
- Hydraulic Station 1set
- Distribution Cabinet 1set
- Main operating cabinet 1set
- Vice operating cabinet 2set
Hydraulic pressure loading trolley:
- Function:Working as prepare, transit and hang materials. Lifting and horizontal movement,which is very convenient to lead the steel coiler to collapsible drum coiler, using hydraulic cylinder to lift,using cycloid reducer to horizontal movement
- structure:welded by steel plate and profile steel
- Max weight load:30T
- Walking motor:BWED41-121-2.2KW(Changzhou )
Singer - cantilever type of Hydraulic pressure uncoiled:
- function:Singer – cantilever rectangular pyramid has expansion and contraction ways materials hanging conformation,magnetic powder clutch(mode: FZJ-500) controls constant tension open-book:it is with emergency brake,feeding materials steady as the speed of main cutting machine.
- structure:Made by uncoil rack and roll drum. uncoil rack is welded by steel plate and profile steelRoll drum made by center axis and sector board.
- Max weight load:30T
- adaptive swelling coil inner hole:φ508mm φ610mm(need to add diameter-increase pad)
material hanging support:
1, The main function is reducing load for main bearing,make main bearing uniform load,in case of main bearing's deform.
2, made by rack,oil cylinder,support,swing arm,shaft pin and so on,automatic hydraulic pressure driving feeding machine, leading terminal and shoveling terminal:
- function:through automatically feeding materials and working by hydraulic shoveling terminal,move leading terminal safely, then send in Traction pinch initial correction machine.
- power:BWED42-187-2.2KW(Changzhou) GERMANY LISNO
- structure:Welding by steel plate and profile steel.
Traction pinch initial correction machine:
1, function:For uncoiling steel coil and sending to next step. Control hydraulic cylinder and synchronous up/down device to adjust pinch roll and uncoil roll.
2, motive power:22KW DC adjustable speed motor
(SHANGHAI NANYANG)
3, reduction:JZQ500-10.35(Taizhou)
4, double pinch roll's diameterφ180mm, coated plastic polyurethane,grinded5 uncoiled roll diameter φ120mmIF Quenched on surface,grinded.
5, It used X type carbon shaft(SWC-150-650 standard) between gear distribution box and pinch roll, and used X type carbon shaft(SWC-150-650 standard) between gear distribution box and uncoiled roll.
6, structure:made by two pinch rolls and 5 uncoiled rolls, wall plate,motor,reduction and machine supported.
, steel strip head/tail shearing machine:
- function:cutting the coils which need to product tidily,easy for next step.It could cut the coil when reach end place by manual order.
- cutting mode:Mechanical type.
- Structure:made by wall plate,upper/lower blade seats, blade, clearance adjustment, gear, motor and so on.
- cutting spec:thickness 3mm× width 2000mm.
front looper pallet rack(looper pit)
1, function:looper is used for controlling speed of steel coil into slitting machine,buffer the speed of coil to the traction pinch initial correction machine,it used by hydraulic lifting,easy to guide coil when starting machine.
2, structure:looper pallet rack welded by steel plate and profile steel, table is applied scratch-resistant plastic panels and passive roller(diameter φ65mm),lifting controlled by hydraulic pressure.
center directing and correcting device
1, function:guiding steel plate into slitting machine smoothly,and making center of plate match with the center of machine,raising products' quality.
2, structure:Made by guider support, dovetail refined guide, guiding roller, adjustment screw, sliding seat, hand wheel and so on.
Slitting host machine:
- Slitting host machine:power:55KW DC adjustable speed motor(SHANGHAI NANYANG)
- Reduction:Mode: JZQ650-20.49(Taizhou)
- Dynamic part:made by frame seat, reduction, gear box, X-type carbon shaft and so on
- Slitting part: made by blade spindle slide,blade spindle bearing, upper slide pressing structure(pressing motor:BWD2-35-2.2KW),thrust block and so on. blade spindle material: 40Cr,spindle diameter:φ220mm quenching, hard chromium plating and grinding on surface.
- Slitting blade:material LD BLADE
Spec.(out-dia×in-dia) |
thickness(mm) |
qty(pc) |
||
φ350mm×φ220mm |
19 |
82 |
|
|
Slitting blade gasket Guiding shovel plate(material: epoxy plate and blankets or carpet)
sliver rolling machine(1 pc at left and 1 pc at right):
1, function:Placed at both side of producing line, the function is rolling two waste slivers after slitting machine cutting the slitting.
2, features:there are two torque motor(mode:YLJ132M-40-6),they are used for monitoring the machine speed automatically. Adjust rolling