80RA soft light no glare T8 5FT LED Tube For indoor with 360°glass cover
Features:
1. Perfect light quality design, system efficacy > 100lm/W , can replace traditional fluorescent tube light.
2. Very even light output, no-glare design.
3. Universal power input range of 85~265 VAC.
4. Very nice design, high quality glass material body.
5. Environmental friendly. RoHs Compliant
6. The color temperature follows ANSI C78.337 Standard.
Description:
Using hi-tech light diffuser, no glare
Longer Life than fluorescents, 5 years.
Good light quality and good heat dissipation
Instant start, no flickering, no humming
Special circuit design, each LED work separately,
Avoiding the single broker LED influence problem
No fluorescent flickering
Explosive-proof No hazard of mercury or lead entering the environment
Application:
The commercial application place where need high lux level but soft can clear light quality,
such as big shopping mall, hospital, office, factory, school, airport, etc.
Item No. | RE-G-T8-0.6M | RE-G-T8-0.9M | RE-G-T8-1.2M | RE-G-T8-1.5M |
LED Tube | T8 tube | T8 tube | T8 tube | T8 tube |
LED Chip | SMD2835 | SMD2835 | SMD2835 | SMD2835 |
Power | 9W | 12W | 18W | 22W |
Length | 600mm | 900mm | 1200mm | 1500mm |
Light output | >900lm | >1200lm | >1800lm | >2200lm |
Body Material | Glass | Glass | Glass | Glass |
CRI | ≥80 | ≥80 | ≥80 | ≥80 |
Color Temp. | 3000K/4000K | 3000K/4000K | 3000K/4000K | 3000K/4000K |
Power Supply | AC 85-265V | AC 85-265V | AC 85-265V | AC 85-265V |
Working | 50/60Hz | 50/60Hz | 50/60Hz | 50/60Hz |
Power Factor | >0.95 | >0.95 | >0.95 | >0.95 |
Beam Angle | >300° | >300° | >300° | >300° |
Working Temp. | -10~50 | -10~50 | -10~50 | -10~50 |
Working Lifetime | >25,000 hours | >25,000 hours | >25,000 hours | >25,000 hours |
Certificate | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL | CE,RoHS,ETL |
Light Source Test Report
Dimmension(unit:mm)
nstallation instructions
Attention
Led tube could be installed directly to replace traditional tube for the traditional T8,T10 fixtures (Just take off the Starter is ok).
- Led tube must work with the correct voltage as the specification(rated voltage)
- Do not open the led tube by yourself.
- We recommend you remove the inductive ballast, for indoor use.
- Such led tube cannot replace emergency light
- We recommend that the suitable working temperature should be -20C ~ + 40C for our led tube, if exceed this range, will bring bad situation for product lifetime.
- The product installation & maintenance should be operated by professional workers
Remark:This product performance is being improved unceasingly, like has the change, not separate informs even slightly. Competitive Advantage:
1 high power LED source with low attenuation,
2 Low power consumption, highly efficiency, highly antistatic,
3 saving energy and protection environment,
4 long lifespan(>50.000hrs)
5 No fluorescent flickering
6 No RF interference, no buzzing noise.
7 Easy in stallation
8 No dangerous of glass broken
9 Heat resistance up to 380
10 No coating falling off, color change, anti back flow;
11 Explosive-proof
12 Blue-ray resistance without human hazard and provide eye protection
13 CE/ETL & ROHS approval
