Higher Reliability AAC Sand Lime Block Machine AAC Block Production Line
High quality Mingjie china aac block production line:
1. high quality Mingjie china aac block production line is a new kind of block making
machine which is simple and easy to operate. It applicate all kinds of industrial waste to produce various of size and models of blocks by changing the pallet, which are widely used in hydraulic construction, road square garden construction, the high quality Mingjie china aac block production line has become more and more popular in the construction industry with its good performance and high efficiency, high capacity, high density, no need pallet and short curing period.
2. The principle of high quality Mingjie china aac block production line:
high quality Mingjie china AAC block production line is suitable for the work on the level surface, hoist the mold box after forming the mold, let the plate rotated and make the driving wheel moving forward through the chain wheel driving, turning with a universal steering, the machine save time and plate, small investment with quickly effect.
3. Features of high quality Mingjie china AAC block production line:
1). The block machine is easy to operate and maintenance, with light weight, small size and simple structure
2). Low cost, small investment, for wide raw material
3). Quickly return and the strength of the brick is much higher than the sintered block;
4). It is convenient to replace the mould, high quality Mingjie china aac block production line can realize multi-usage, reduce the cost of investment
5). Using waste of recyle raw material, save resources, to achieve the effect of environmental protection
6). No need to plate, save the cost of pallets
7). high quality Mingjie china aac block production line is the ideal equipment for small investment customer.
4.Raw material
Cement,lime,sand,gypsum,aluminium powder, water
5. The equipment will be divided into two parts: specialized equipment and universal equipment.
Specialized equipment includes:
1). Cutting equipment: tilting crane, cutter.
2). Proportioning equipment: elecronic measuring,slurry beating machine, slurry storage tank, slurry mixer.
3). Pouring and autoclave equipments: aluminum powder mixer, pouring mixer, mould, side plate, autoclave truck, carrier car.
4). Environment protect equipment: dust remover.
Other relative equipments as follows:
1). Cutting machine.
2). Tilting hanger, mould, side plate, hardening cart, mould frame, mould bottom, casting machine, hoist
3). Autoclave,horizontal installation stem boiler
The aerocrete produces the technological process:
1). The raw materials store in the material storehouse (or stores the pot) after dealing with reserve such as lime, cement, gypsum, sand (or fly ash)
2). Aluminium powder or aluminium lotion is through dealing with the reserve material for use
3). Raw materials measure according to certain matching by electron balance measure, aluminum powder, water put into aluminum mixer. it is suspends the liquid to make the mixture after measuring.
4). The batching water (cold water or hot water pitcher hot water) is measured by the electronic water balance.
5). Put into and pour among the mixers in certain order after, raw materails, aluminum powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould)
6). Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang from upset hoist upset 90 degree after the base body reaches certain intensity, the drawiang of patterns is cut
a. The base body carries on the side and cuts and mills through vertically at first
b. Then carry on the vertical level to cut
c. Cut horizontally finally
d. Cut good base body raises to cauldron car go on one year of shelves organize into groups to steam to transport to hang to drive a vehicle to load
7). Raise products well, produce after the cauldron breaking the board off the fingers and thumb by the board breaking off the fingers and thumb machine to steam
8). Pile from finished product hoist or forklift to finished product field pile the according to specification to carry
9). Steaming and raising the car and side board and entering the next board of circulation and returning after, the finished product is unloaded, with upset hoist mould frame association the drawing of patterns get off, restore 90 degrss return to pour mixer pour again after clearing up.
Company information:
Our service: Help to choose equipment, make the site planning, designing, installing and training for customers.
Our core value: Integrity, dedication, innovation, reliability.
Our purpose: Intentions, honest
Our mission: We supply quality products and perfect service for your satisfaction.
