Dali 42-60W Dimmable LED Light Panels UL8750, ENEC, GB19510.14,GB19510.1 approval
Features:
|
Product Name |
Dali 42-60W Dimmable LED Light Panels |
Frequency Range: |
47-63Hz |
|
Power |
42-60W |
Efficiency(Typ.): |
92% |
|
Output current level |
Selectable by DIP S.W |
DALI Standards: |
Comply with IEC62386-101, 102, 207 |
|
Voltage |
180 ~ 295VAC 254 ~ 417VDC |
Certificate |
UL8750, ENEC, GB19510.14,GB19510.1 |
Specifications:
|
Model |
CLP-NDALI-(42-60)W |
|
Rated Power |
42-60W |
|
Selectable Current |
500-1400mA |
|
DC voltage range |
2-90V |
|
Ripple Current |
±5% |
|
Ripple & Noise(max.) |
700mVp-p |
|
No-load Output Voltage(max.) |
95V |
|
Current Accuracy |
±5.0% |
|
Setup, Rise Time |
500ms, 80ms / 230VAC at rated power |
|
Hold Up Time |
16ms/230VAC at rated power |
|
Voltage Range |
180 ~ 295VAC 254 ~ 417VDC |
|
Frequency Range |
47 ~ 63Hz |
|
Power Factor(Typ.) |
PF0.975/230VAC, PF0.96/277VAC at rated power |
|
Total Harmonic Distortion |
THD will be lower than 20% when output loading is 75% or higher |
|
Efficiency(Typ.) |
92% |
|
AC Current(Typ.) |
0.32A/230VAC |
|
Inrush Current(Typ.) |
COLD START 20A(twidth=260μs measured at 50% Ipeak) at 230VAC |
|
Leakage Current |
<0.5mA / 240VAC |
|
Short Circuit |
Constant current limiting, recovers automatically after fault is removed |
|
Over Voltage |
1105~ 125V |
|
Over Temperature |
Shut down o/p voltage, re-power on to recover |
|
Auxiliary Power(optional) |
12V @ 50mA for driving fan; Tolerance ±5% |
|
Temp.Compensation |
By external NTC(not provide with the power supply) |
|
Working Temp. |
-30 ~ +60 (Refer to "Derating Curve") |
|
Working Humidity |
20 ~ 90% RH non-condensing |
|
Storage Temp.,Humidity |
-40 ~ +80, 10 ~ 95% RH |
|
Safety Standards |
UL8750, ENEC, GB19510.14,GB19510.1 approved |
|
DALI Standards |
Comply with IEC62386-101, 102, 207 |
|
Withstand Voltage |
I/P-O/P:3.75KVAC |
|
EMC Emission |
Compliance to ENEC;Class C;GB17625.1,GB17743 |
|
Warranty |
3 Years |
Description:
Dali Dimmable LED Light Panels
180~295VAC input only.
Built-in active PFC.
Output current level selectable by OIP switch led dali driver panel light.
Built-in DALI interface and push dimming function(DA version).
Built-in 0~10Vdc and PWM signal dimming function(Non-DA version).
Power suppy synchronization function up to 10 units.
Temperature compensation function by external NTC.
led dali driver panel light Classpower unit,ungrounded.
Built-in 12V/50mA auxiliary output(Non-DA version).
led dali driver panel light Full plastic case enclosed.
No load power consumption1W(0.5W for DA version).
Protections:Short circuit / Over voltage / Over temperature.
3 year warranty.
Suitable for intelligent LED panel lighting.
Applications:
Sitting room;
Bedroom;
dining room;
corridor;
hotel,etc.
Suggestion: the installation height of droplight, the lowest point shall be not less than 2.2 meters off the ground.
The Dali led panel light consists of the led panel light, DALI led power supply, DALI systems. With these, you can control all of the led panels in the building.
