Instruction
Pneumatic turbine submersible pump is a pneumatic turbine drive, the compressed air powered new pumps.Mainly used in mine exploitation, shaft shaft construction, drainage of the basement engineering construction.In addition, according to all that have all sorts of site construction drainage, compressed air can be widely used
Character
1, stepless speed regulation.As long as the control throttle opening program, that is, control the gas flow, can realize stepless speed regulation.
2, the use of reliable, durable, is not affected by temperature and vibration, installation, operation, simple.
3, has a quieter, low noise, easy maintenance, small parts.
4, have high starting torque and ability to work almost instantaneous up to full speed.
5, strong ability to adapt.Adapted to discharge water, water, mud, mud, sand, coal cinder water), light in weight.
Reference
Phase 1, 5 to 35 m cheng (double side wind 5-50 m)
2, 8-28 traffic m3 / ih
3, working air pressure 3-6 KGF/cm2
4, the consumption of air volume 3-4 m3 / min
5, rated speed 4500 r/min
6, wheel diameter 120 mm
7, into the wind hose diameter 25 min
8, drainage hose diameter 50 min
9, 88 db noise or less
Application
Wind turbine submersible pump is according to the actual requirement of our mining site construction, adopt pneumatic turbine driving, compressed air to power a new type of submersible pump.Pneumatic submersible pump is widely used in the mine shaft and develops, shaft shaft construction, underground chamber and mining working face to discharge water, water, sediment, water slurry, coal cinder and various kinds of mineral water.This pump is equipped with advanced quieter, can make the noise is reduced to less than 40 decibels, in addition the pump also has small volume, light weight, high lift;The structure is compact, mobile convenience;Durable, easy maintenance.
