Primary Metal Melting Furnace Dust Extraction Units with Spark Arrester
Primary metal melting furnace dust extraction system with spark arrester . For different working condition in steel plant , we will provide special and expert filtration solutions for the dust collection / dust extration systems for the fumes generated from the melting furnace , sintering furnace , blast furnace / shaft furnace ,induction furnace .
Brief Introduction :
ECOGRACE steel plant electronic furnace dust collector systems always with air flow from 30000M3/H to 400000 M3/H , We provide the key solution for both ambient temperature and high temperature . We will design the high efficiency hoods for good suction , and also the ducting works .
Dust Collector technical specification :
|
Model No. |
EDMC 120 |
|
Air Flow |
100000 M3/H |
|
Filter speed |
1.0M/min |
|
Temperature of the gas |
Ambient |
|
Filtration area |
2000 M2 |
|
Filter media |
Polyester filter bag |
|
Filter bag size |
D160 x L 6000 |
|
Compressed air consumption |
0.5-0.7 M3/min |
|
Pulse valve size |
2.5 inch |
|
Resistance |
<1000 pa |
Working Principle of steel plant Dust collector Filter Unit :
1. The compostion of small dust collector unit :
Baghouse dust collection system ,
Fan suction system ,
Dust discharging and dust conveyor systems
2. The filter cleaned by solenoid valve pulse imported from US or Europe.
3. Filter cage and filter bag will be fit in the assembled baghouse .
4. Good and reasonable design for the hoods and capacity of dust collector will reach a very different working result for the steel plant induction furnace .
Advantage of ECOGRACE smaller dust collector Filter Unit :
1. Easy operation maintenance.
2. Lower resistance , energy saving .
3. High filtration efficiency up to 99.99% , low emission < 30 mg/ M3.
5. Lower system resistance up to < 1000 pa.
6. ECOGRACE self made fabric filter bags will be with free replacement in 3 years.
ECOGRACE project show :
Production and shipping :
