Introduction of electrostatic powder coating oven
Powder curing oven – whether electrical, gas or diesel fired. Whether batch type or conveyorised tunnel type. Designed and built specially for Powder curing purposes assuring you of low power consumption with uniform temperature throughout the working space in the oven. When a thermostat powder is exposed to elevated temperature, it will begin to melt. As the material begins to melt, it will flow out and then chemically react to form a higher molecular weight polymer in a network-like structure. This cure process, called crosslinking, requires a certain degree of temperature for a certain length of time in order to reach full cure and establish the full film properties that the material was designed for.
Commonly in a range between 150-250 degrees Celsius. The part is heated by the hot air in the oven and it in turn conducts heat into the coating.
Convection cure time may be as short as 10 minutes or as long as 30 minutes, depending on the mass of the substrate and the cure requirements of the powder.
Opened the chamber of the powder coating oven
Trolley
Working processing:
Connect the gun wires-- 2. Hang the workpieces, when it go into booth chamber, painting it.-- 3. After painting the workpieces will go to oven chamber to bake 15~30 minutes(180~230 degrees celsius ).-- 4. Take out the workpieces from oven, natural cooling.-- 5. Finish.
Technical parameters of electrostatic powder coating oven
Model | Colo-3518 |
Worksize dimensions | 1800width x 2200 height x 3500 depth |
Overall dimensions | 1900 width x 2300 height x 3600 depth |
Power supply | Electric/ 12kw |
Voltage/Frequency | 380V/220v(50-60hz) |
Warm-up time | 15-30 min. (180° C) |
Temperature stability | < ± 3-5°C |
Temperature max. | 250° C |
Ventilation performance | 805-1677m3/h |
Motor power | 0.75kw |
Circulation/ Air flow | Vertical ,Variable through holes on the walls |
Transportation | Trolley |
Warranty | 12 months |
The other options
Powder spray gun:
Powder spray booth:
Powder coating line:
Contact Colourful
Thanks very much for your time, welcome to contact Colourful, we are with you within 24 hours.
We want to know following information.
1), What's the materials of your workpiece?
2), What's the biggest sizes and weight of the workpiece?
3), The anticipative output for the biggest size of the workpiece ( how many pcs in 8 hours)?
4), Which heating powder you need, LPG or liquefied natural gas, diesel, or electric?
Pls send us inquiry!
contact with sonne
Skype:hicolosystem
Mobile: 0086-13396517032
Fax : 0086-571-86015003
Zip : 310010
E-mail:colo@colourspray.com
