Customized Blue Simple Automatic PU Sandwich Panel Machine for 25-100mm
Primary technology parameters of PU sandwich panel product line
- Production Material(mm):(0.25-1.0)×L, yield strength≤G300 Colored steel
- Production speed:4-8 M/min
- Production type: totally continuous production with PLC controlling
- PU foam thickness: 25-100mm
- Composite structure:position fixed by double rubber tracker
- Foaming system: totally automatically continuous foaming, quantity of foaming could be stepless adjustable
- Power of production ≥ 22KW
- Total power ≥ 35 KW
- Cutting:pneumatic piston driving, non-stop cutting via sliding table
- Electronic controlling system: full-frequency PLC controlling system
Specification detail of machine
Two sets of un-coiler:
It is Automatic and hydraulic, can be used to uncoil steel coil which is maximal 1300mm's wide, no more than 8 ton's weighty and steel coiler's inner diameter is about 500mm.
Three sets of roll forming machine
- Function: Roll forming for the profiles of PU panel
- Use the welding H-beam, motor driver, sprocket chain driving
- Technical data: Material of roller NO.45forged steel, with digital controlled procession,plated with hard chrome on surface of forming rollers.
PU Sandwich foaming line
- Two sets of conveyor rack: up conveyor is about 24m, down conveyor is about 30m.They lead the steel sheet from the roll forming machine to preheating room and to foaming,to cutting.
- One preheating room: It is built by heat-insulation material, and it could heat up the steel sheet to 25-38 by heater.
- One set of PU two component Liquid mixing and injecting section for foaming : it adopt Chinese high pressure pump. It have the temperature control system and material-level monitoring system. The tank of the material is about 150L. Two tanks.
- Foaming and double rubber device include motor driver system to make panel.
- The width of belt board is 1250mm, the range of adjusting distance between upper and lower frame belt board: min 25mm, max 200mm. And the range of adjusting thickness of sandwich panel :30mm,50mm,100mm.(30-50 for celling , 50-100 for wall)
Panel automatically cutting system
- Cutting machine can move 2500mm longitudinally along product line,fly saw of the cutting machine can move transversely 1900mm, Cutting machine moves longitudinally and transversely along the slide way.
- Cutting machine adopts one-side blade band saw manner, cutting and revolving after cutting. The cutting saw can revolve, so cutting in two directions is realizable.
- There is panel tight-pressing system (pneumatic) in the cutting machine.
- There is location limiter to limit longitudinal and transverse motion of cutting machine.
Electric control system
- The control system adopt the touch screen , PLC , module control and transducer,the control system adopt Panasonic(JAPAN) product.
- There one control platforms and electric trunk by which operating and controlling the electric motors and all motions (including hydraulic and pneumatic) in the product line.
- Intercalated appropriate amount of portable switch on the product line, so manual operation get convenient.
- Alarm and emergency stop system should be installed in the product line in case accident happens.
Working flow
Coiler loading → adjustable feeding guide → steel panel forming → steel sheet feeding guide → PU foaming → PU panel conveyor → non-stop cutting
