Durable Outside Wall Insulation Board / House Insulation Panels Heat-Proof High Performance

Product

Performance

Metal Fluorocarbon Painting Decorative Insulation
Board

Decoration
Layer

Metal Fluorocarbon paint decorative board

High hardness, impact resistance, anti-buckling, wear resistance, anti-corrosion ,acid, salt. free Maintenance,self-cleaning no dust sticked, strong adhesion,weather resistance

 No chalking & fading, over 25 years long service life . with the  excellent insulation performance, low thermal conductivity and stability,no affected by temperature and humidity changes,and with the anti-water , permeability and other characteristics, to keep the whole building to achieve the constant temperature and humidity, constant oxygen.

Insulation Layer

EPS insulation layer
(Grade B1)

Heat conductivity ≤0.041.  volume-weight :18kg / m³ with the tensile strength:110--120kpa; volume-weight 20kg / m³ with the tensile strength :140kpa.

XPS insulation Layer
(Grade B1)

Heat conductivity ≤0.030. Volume-weight 25--45kg / m³ & tensile ≥150kpa. Strong compressive resistance.   30-40 years average using life. Excenllent structure load-bearing performance .

Polyurethane insulation board
(Grade B1)

Hard polyurethane with low thermal conductivity, good thermal performance. When the hard polyurethane with the  density of  35 ~ 40kg / m3, thermal conductivity is only 0.018 ~ 0.024w / (m.k), equivalent to  half of the EPS, is the lowest heat conductivity of all the insulation materials .

TPS insulation board
(Grade B1)

Heat insulation thermal conductivity is 0.060W / (m · k) ,it has good tensile compressive strength , impact resistance and stability ; its compressive strength reaches 150-500KPa

Rock wool  (Grade A)

Appearance quality: smooth surface, without prejudice practical scars, stains damaged. Combustion performance: non-combustible. Thermal load contraction temperature: 643 degrees.
Moisture absorption: 3.9%. Organic content: 2.9%.
Rockwool board basic parameters:
Material: rockwool
Apparent density: Rockwool 120 (kg / m3)
Heat conductivity: 0.04 (W / (m.K))
Max operating temperature: 80 ()
Specifications: 950,1150 (mm )
Operation standard: GB
Operating temperature: 80 ()

Phenolic Foam Board(Grade B Grade A)

Not be melt at high temperatures ,not be softened, with low smoke, non-proliferation flame resistance, flame penetration, There is  no distortion, no burning ,no fire, being placed 10 minutes at 1400 , can effectively prevent the flames and smoke spread

Item

Detection standard and requirements

The third party test 

results

Weather resistance

JF149-2003,

JGG144-2004

After weather resistance test,

No damage such as facing layer 

blistering or falling off,Protective

 layer hollowing or falling off; No 

seepage crack appear.

No damage such as 

facing layer blistering

or falling off,Protective

 layer hollowing or 

falling off; No seepage 

crack 

JG149-2003,

JGJ144-2004

Impact-resistance strength 

grade:10

Water absorption 

g/,Immersed 

24H

JG149-2003,

JGJ144-2004

≤500

21

Wind pressure

 resistance value   

KPa

JG149-2003,

JGJ144-2004

Not less than the wind load 

design value of the project

After 15 kpa level wind 

load esistance test,,no 

water seepage

Freezing and 

thawing resistance

JG149-2003,

JGJ144-2004

No surface cracking,hollowing,

blistering,exfoliation

No surface cracking,

hollowing,blistering,

exfoliation

Steam flow density g/(·H)

JG149-2003,

JGJ144-2004

≥0.85

2.36

Watertightness

JG149-2003,

JGJ144-2004

Sample protective layer inside 

without water infiltration

Sample protective layer 

insidewithout water 

infiltration

Thermal conductivity W/(m·k)

GB/T10801.1-2002,

JG149-2003

≤0.041

0.033

Apparent density 

kg/m³

GB/T10801.1-2002,

JG149-2003

18.0-22.0