PRODUCT INTRODUCTION:
WISDOM Stellite's™ cobalt base alloys are available as cobalt rods, cobalt electrodes, cobalt wire and cobalt powder. Cobalt alloys are used primarily for wear applications, our cobalt alloys can be applied by any known fusion welding process or HVOF spraying proess and are particularly well-suited for hardfacing applications. Cobalt alloys are the most widely used wear resistant hardfacing materials available. Their unique combination of wear resistance, strength and corrosion resistance make them adaptable to many harsh environments. Cobalt alloys are selected for their excellent resistance to the widest combination of wear types including adhesive wear, abrasion, erosion, contact fatigue, thermal shock, cavitation wear, corrosion and oxidation. The degree to which the cobalt alloys retain these properties assures their unique position in the wear technology field.
StelliteTM 1 is a hardfacing alloy possessing excellent abrasion and corrosion resistance for applications such as pump sleeves, rotary seal rings, wear pads, expeller screws and bearing sleeves. It retains its hardness at temperatures in excess of 760°C (1400°F).
StelliteTM 1 contains a high proportion of hard, wear resistant
primary carbides. These render the alloy well suited to applications
involving extreme low-angle erosion and severe abrasion, with some
sacrifice in toughness. Compared to other StelliteTM alloys it is more
crack-sensitive, and care should be taken to minimize the cooling
stresses experienced during casting and hardfacing processes. Due
to its high hardness and wear resistance, StelliteTM 1 should only be
finished by grinding.
CORROSION RESISTANCE:
StelliteTM 1 has good general corrosion resistance. The typical
electrode potential in sea water at room temperature is approx.
-0.4 V (SCE). StelliteTM 1 corrodes primarily by a pitting mechanism
and not by general mass loss in seawater and chloride solutions.
More detailed information regarding corrosion resistance can be
provided on request.
Features:
1) Powder of three main alloys: cobalt-base alloy, nickel-base alloy, and
iron-base alloy, stellite alloy
2) Properties: good resistance against high-temperature, corrosion, wear,
shock and stick abrasion
3) Main application: use to repair and pre-protection of valve seat, pump
shaft sleeve and valve gate
4) Process: OXY, PTA, high frequency remelting
5) Specifications: 150/320, 200/400, 280/400, 180/400, 60/170, 60/200
About Delivery and shipping :
1. For the products which we have raw material in stock.
We can deliver the products within 7-10 days after the payment has been confirmed.
We will choose the shipping way as you required: By sea, by air, by express, etc.
As for the costs and shipping period information, please contact us via telephone, mail or online trade manager.
2.For the products need to start from smelting
We will finish the production within 20-25 days after the deposit has been confirmed. We will choose the shipping way as you required: By sea, by air, by express, etc.
As for the costs and shipping period information, please contact us via telephone, mail or online trade manager.
