Tankless 66 Gallon Hybrid Heat Pump With R134a Refrigerant UL Approved
Description
Hot water heat pump is designed for offering sanitary hot water for family. As a lovely equipment which could be put indoor, a lot of attention had been put on its facies design. To make the whole unit small, the structure inside is also compact and well organized.
The heat pump is available to offer 60 hot water. 3 times higher efficiency than gas boiler or electrical heater, which could save a lot of cost for the user.
With electrical element inside as back up, the user could get constant hot water even in extreme cold winter.
Various function is another bright point. With different ways of installation, the unit could act as not only a heat pump, but also an air conditioning, a dehumidifier, a fresh air blower, or an energy recovery equipment. Various function bring you more value than a heat pump.
Specification
|
Technical Data |
AXHW-23a/66 |
|
|
Heat pump output |
2.25KW/7677Btu/h |
|
|
Energy_Factor_EF W/W |
2.68 |
|
|
First_Hour_Rating_GPH |
65 |
|
|
Max.Output Water Tem |
158 |
|
|
Power Supply |
208 / 230Vac, Single Phase |
|
|
Frequency |
60HZ |
|
|
Fan motor FLA |
0.45A |
|
|
Primary/Back-up Electric Heater Element Current Rating |
18A |
|
|
Maximum Input Current |
22A |
|
|
Compressor |
RLA 2.5A, LRA 16.5A |
|
|
MCA |
30A |
|
|
MAX FUSE |
25A |
|
|
Refrigerant |
R134A(660g/1.46ibs) |
|
|
HP(Max) |
2.1MPa(305psig) |
|
|
LP(Max) |
0.62Mpa(90psig) |
|
|
Max. Water operating pressure |
1.0MPa(145psig) |
|
|
T&P Relief Valve |
100psig/210 |
|
|
Storage tank volume |
66Gallon |
|
|
Weight: |
198 ibs |
|
|
Unit protection class |
IPX1 |
|
Standard unit composition
¡ Compact design with 200L/ 250L/ 300L available for option.
¡ Stainless steel tank inside, plus 55mm insulation.
¡ Double wall exchanger keep refrigerant more far away from water.
¡ Extremely compact structure, good looking face, and easy demountable for access.
¡ High efficiency compressor with R410a refrigerant.
¡ Reverse cycle valve.
¡ Intelligent controller and adjustment by quick mind microprocessor
¡ Air exchanger ( Fins- coil) with hydrophilic coating.
¡ Automatic defrosting function included.
¡ Electrical heating element inside as back up for emergent request.
¡ Thermostatic expansion valve.
¡ Air outlet and inlet designed with duct connection, with the ability for various
ways of connections to get different functions.
¡ General testing and operational test carried out for every unit before package
in the factory.
Optional:
¡ Refrigerant R134a are available.
¡ Water tank 200L/ 250L/ 300L are available for option.
¡ The tank is available to have gas coil or water coil equiped inside for external
