Cool White 1800lm 18W T8 Tube Indoor LED Lighting No UV, Supermarket Use
Specifications:
|
Model Number |
ISL-TLS-18WN |
Power Factor |
>0.9 |
|
Power |
18W |
Beam Angle |
180° |
|
Luminous Flux |
1800m |
Lifespan |
50000H |
|
Input Voltage |
AC 85-265V |
Warranty |
3 years |
|
LED |
SMD 2835 |
CCT |
2700K-6500K |
|
Driver |
Internal Non-Isolated |
Certification |
CE/ RoHS/ SAA/ TUV/ SGS |
|
CRI |
>80 |
Size |
1200MM |
Features:
1. This model of non-isolated 18w T8 LED tube adopts well-known high brightness Epistar SMD2835 as the light source and takes high light transmittance PC cover and reliable high efficiency driver to make the tube a top quality product. It is equipped with a PIR Sensor with trigger angle 120°, trigger distance 5-8M. When you enter the detection area, the light will work automatically without manual operation.
2. Frosted PC cover is available as well as the transparent one, customers can choose either higher luminous efficiency or softer illumination environment. ISHINELUX also provides tubes with both isolated and non-isolated drivers for customers' higher level of safety or lower pricing consideration. With all key electronic components of high quality, ISHINELUX LED tubes are top quality products for you.
3. Applications: hotels, conference/meeting room, commercial complexes, residential/institution buildings, schools, colleges & universities, hospitals general lighting, commercial lighting, plant growing lighting.
4. Customized solution: Isolated/non-isolated types, 3 years warranty and 2 years warranty optional, with different pricing for different markets.
5. Note: ISHINELUX aims at providing the most competitive service to every customer. For customized solution and detailed quotation, please feel free to contact us.
Installation(inductive ballast):
1) Turn off the power to the light fixture at the breaker panel before installation.
2) Open the diffuser from the light fixture.
3) Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
4) Open the wiring cover to expose the fluorescent ballast.
5) Cut the wire as shown. Do not remove the starter and ballast, Keep it in place.
6) Make the new wire connect to branch circuit shown as the diagram below. Connect the L/N to one end of lampholder, the other end of the lamp access to the other end of the lampholder. After modified, add an identification for the live end of lampholder, e.g.”LIVE END” or”L, N”.
7) Replace the cover over the wiring channel.
8) IMPORTANT: Install the label provided that states "this fixture has been modified for LED lamps", inside the fixture in an easily visible location to anyone changing lamps, possibly on the cover over the wiring channel.
Installation(electronic ballast):
1) Turn off the power to the light fixture at the breaker panel before installation.
2) Open the diffuser from the light fixture.
3) Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
4) Open the wiring cover to expose the electronic ballast.
5) Cut the wire as shown. Do not remove the ballast, Keep it in place.
6) Make the new wire connect to branch circuit shown as the diagram below. Connect the L/N to one end of lampholder, the other end of the lamp access to the other end of the lampholder. After modified, add an identification for the live end of lampholder, e.g.”LIVE END” or”L, N”.
7) Replace the cover over the wiring channel.
8) IMPORTANT: Install the label provided that states "this fixture has been modified for LED lamps", inside the fixture in an easily visible location to anyone changing lamps, possibly on the cover over the wiring channel.
Product Details:
