Constant voltage 30 Watt LED Driver Power Supply 2.5A Slivery White High efficiency
Specification:
|
MODEL |
12V30W |
24V30W |
|
|
OUTPUT |
DC VOLTAGE |
12V |
24V |
|
|
RATED CURRENT |
2.5A |
1.25A |
|
|
CURRENT RANGE |
0~2.5A |
0~1.25A |
|
|
RATED POWER |
30W |
30W |
|
|
RIPPLE & NOISE(max.) NOTE 2 |
100mV |
100mV |
|
|
VOLTAGE TOLERANCE NOTE 3 |
±2% |
±2% |
|
INPUT |
VOLTAGE RANGE |
190~250V |
|
|
|
FREQUENCY RANGE |
50~60Hz |
|
|
|
POWER FACTOR (Typ.) |
PF>0.5/220VAC |
|
|
|
EFFICIENCY (Typ.) |
81% |
85% |
|
|
AC CURRENT (Typ.) |
0.28A/220CAC |
|
|
PROTECTION |
Short circuit |
Protection type : recovers automatically atter fault condition is removed |
|
|
|
Overload |
overload protected @ 110-140% above peak rating |
|
|
|
Over temperature |
Protection type: Shut down o/p voltage, re-power on to recover |
|
|
ENVIRONMENT |
WORKING TEMP. |
-30 ~ +50 ( Refer to output load derating curve) |
|
|
|
WORKING HUMIDITY |
20 ~ 99% RH non - condensing (Waterproof) |
|
|
|
STORAGE TEMP., HUMIDITY |
-40 ~ +80 , 10 ~ 99% RH |
|
|
SAFETY & EMC |
SAFETY STANDARDS |
CE Mark ( LVD), IP67 |
|
|
|
WITHSTAND VOLTAGE |
I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC |
|
|
|
EMC Test Standards |
EN55015:2006;EN61547:1995+A1:2000; EN61000-3-2:2006; EN61347-1:2001:EN61347-2-13:2006 |
|
|
NOTE |
1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature. terminated with a 0.1 μf &10 μf parallel capacitor. |
||
Quality :
We have the best professional and experienced engineer and strict QA and QC system.
Rpair rate under 0.1%~0.2%.
Delivery:
Strong production capacity: 6000 pieces per day, could provide customerlized package upon request.
We will make the the shipping to be the most economical for you
and freight cost is informed in advance for your consideration and requirements
General Specification:
• High efficiency,save energy ,protected environment
• High stability and low ripple, increase light efficiency and decrease light attenuation
• Meet to safety standard and EMC
• Assure LED stability long lift and light efficiency by constant voltage
• Passed high ,low temperature and waterproof testing.
• Integrity protection,over loading, over voltage ,over current
• 8Hrs and 100% full load burn-in test.
Warranty policy:
1: Warranty: 2 years.
2: 100% of all delivered products will be tested before shipping by our QC staff
3: During the warranty period, we will immediately supply replacement for free.
then send it to you with your next order together.
4: After warranty period, we will guide you to repair and provide you spare parts.
Constant voltage 30W DC24V/12V LED Driver Power Supply IP67 with 2 years warranty
