DC24V 250W LED Light Strips Power Supply 88% 50000 hours with free colorful box
Specification:
|
MODEL |
12V250W |
24V250W |
|
|
OUTPUT |
DC VOLTAGE |
12V |
24V |
|
|
RATED CURRENT |
21A |
10.5A |
|
|
CURRENT RANGE |
0~21A |
0~10.5A |
|
|
RATED POWER |
250W |
250W |
|
|
RIPPLE & NOISE(max.) NOTE 2 |
300mV |
300mV |
|
|
VOLTAGE TOLERANCE NOTE 3 |
±3% |
±4% |
|
INPUT |
VOLTAGE RANGE |
180~250V |
|
|
|
FREQUENCY RANGE |
50~60Hz |
|
|
|
POWER FACTOR (Typ.) |
PF>0.5/220VAC |
|
|
|
EFFICIENCY (Typ.) |
86% |
88% |
|
|
AC CURRENT (Typ.) |
2.4A/220CAC |
|
|
PROTECTION |
Short circuit |
Protection type : recovers automatically atter fault condition is removed |
|
|
|
Overload |
overload protected @ 110-140% above peak rating |
|
|
|
Over temperature |
Protection type: Shut down o/p voltage, re-power on to recover |
|
|
ENVIRONMENT |
WORKING TEMP. |
-30 ~ +50 ( Refer to output load derating curve) |
|
|
|
WORKING HUMIDITY |
20 ~ 99% RH non - condensing (Waterproof) |
|
|
|
STORAGE TEMP., HUMIDITY |
-40 ~ +80 , 10 ~ 99% RH |
|
|
SAFETY & EMC |
SAFETY STANDARDS |
CE Mark ( LVD), IP67 |
|
|
|
WITHSTAND VOLTAGE |
I /P- OP : 1.5KVAC I /P - GND : 1.5KVAC |
|
|
|
EMC Test Standards |
EN55015:2006;EN61547:1995+A1:2000; EN61000-3-2:2006; EN61347-1:2001:EN61347-2-13:2006 |
|
|
NOTE |
1.All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C of ambient temperature. terminated with a 0.1 μf &10 μf parallel capacitor. |
||
Competitive Advantage:
• IP67 protection grade
• 100% load test, built-in EMI filters
• Full range of input voltage
• output voltage accurate and stable
• Output over-voltage, over-current and short-circuit protection
• Output low ripple and noise
• Two year warranty
• Average working no trouble 50, 000 hours
Description:
1. Protections :Short circuit/Overload/Over temperature
2. Cooling by free air convection
3. IP67 design for indoor or outdoor installations
4. 100% full load burn-in test
5. Suitable for LED lighting
6. Products through CE& ROHS certification
7. Two years warranty
Installation and working environments:
• Make sure work in proper environments are stated in this Guide.
• Do not overload.
• Avoid free of load while a power supply is powered on, keep proper loading
• Always keep good ventilation
• Do not mount on wood or flammable surface
• Keep away from inflammable or explosive environments
IP67 constant voltage DC24V 250W LED Strip Power Supply with free colorful box
