12v 24v 48v 220v low frequency pure sinewave office inverter 1KW-6KW
Pure Sine Wave Inverter Charger Power Star Series PS1Kw-6Kw (1ph in/1ph out)
Application
UPSEN Power Star Inverter can be used for various home appliances, office equipment,
solar power system, and other equipments which use single phase power
Key Features
1:Pure sine wave output (THD<3%), available for sensitive loads
2:High efficiency up to 95% under line mode, and 88% for Battery Mode
3:Easy to check with inverter condition with LED indication that can be upgraded to LCD
4:Supperior performance from CPU control technology
5:Accept generator's energy output
6:Automatically transfer between battery and line modes
7:Microprocessor control guarantees high reliability
8:Bypass without battery connected
9:Generator compatibly and external battery connection achievable
10:Protection against: Over load, over temperature, over charging, low battery
11:High surge capacity starts more difficult loads and handles overload conditions reliably
12:it is suitable for various kinds of batteries.
Technical Specification
| Power Star Series | |||||||
| Model No. | PS1000 | PS2000 | PS3000 | PS4000 | PS5000 | PS6000 | |
| Nominal Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | |
| AC Input | |||||||
| Waveform | Pure Sine Wave | ||||||
| Voltage | 120VAC/230VAC | ||||||
| Acceptable Voltage | 194-243VAC\164-243VAC(wide mode) | ||||||
| Line Low Transfer | 85V±4%/184(154 wide mode±4%) | ||||||
| Line Low Return | 95V±4%/194(164 wide mode±4%) | ||||||
| Line high Transfer | 135V±4%/253±4% | ||||||
| Line high Return | 127V±4%/243±4% | ||||||
| Frequency | 50Hz or 60Hz (Auto sensing) | ||||||
| Line Low Transfer | 47Hz for 50Hz, 57Hz for 60Hz | ||||||
| Line high Transfer | 55Hz for 50Hz, 65Hz for 60Hz | ||||||
| AC Output | |||||||
| Waveform | Pure Sine Wave(bypass mode sync to input) | ||||||
| Voltage | 120/220/230/240VAC(bypass mode sync to input) | ||||||
| Voltage Regulation | ±10%rms(bypass mode sync to input) | ||||||
| Frequency | 50Hz±0.3Hz(bypass mode sync to input) | ||||||
| Peak Power | 3 times of rating power | ||||||
| Short Circuit Protection | Yes,shutdown after 10ms | ||||||
| Power Factor | 0.9-1.0 | ||||||
| DC Input | |||||||
| Battery Voltage | 12V/24V | 12V/24V/48V | 24V/48V | ||||
| Minimum Start Voltage | 10V for 12V,20V for 24V,40V for 48V | ||||||
| Low Battery Alarm | 10.5V for 12V,21V for 24V,42V for 48V | ||||||
| Low Battery Transfer | 10V for 12V,20V for 24V,40V for 48V | ||||||
| High Voltage Alarm | 16V for 12V,32V for 24V,64V for 48V | ||||||
| Max Charging Current | 35A/70A | ||||||
| Over Charge Voltage | 15.7V for 12V,31.4V for 24V,62.8V for 48V | ||||||
| Transfer Efficiency | |||||||
| Line Mode | >95% | ||||||
| Battery Mode | >88% | ||||||
| power saver | Available when the load is less than 25 Watts | ||||||
| Indicators | |||||||
| 7-LED Display | From the right to the left,LED1 line mode (green lighting),LED2 inverter mode | ||||||
| (green lighting),LED3 charging mode(yellow lighting),LED4 Fully charged | |||||||
| (green lighting),LED5 over heat shutdown(red lighting),LED6 Overloaded | |||||||
| shutdown(red lighting),LED7 Saving Mode(green lighting) | |||||||
| 3-LED Display | Charging Mode(green lighting),inverter mode(green lighting), Alarm(red lighting) | ||||||
| Switch selector | Saving Mode is on/off when push the switch forwards/backwards, keeping it horisontal is turning the inverter off. | ||||||
| Audible Alarm | Sounding when the heatsink's tem is over 105ºC and shutdown after 30 seconds. | ||||||
| Protections | low battery,over charging,over temp,over load | ||||||
| Communications | RS-232/USB(custom-made) | ||||||
| Enviromental | |||||||
| Operating Environment | 0-40ºC,0-90%RH(non-condensing) | ||||||
| Audible Noise | <60dB | ||||||
| Physical | |||||||
| Net Weight(KG) | 18 | 20 | 22 | 35 | 38 | 40 | |
| Dimension L*W*H(mm) | 442*218*179mm | 598*218*179mm | |||||
| *Specification are subject to change without prior notice | |||||||
