Self loading concrete mixer truck 4x2 6x4 8x4 5 to 18 cubic meters for Africa
Specifications:
|
Vehicle Specifications |
Model |
concrete mixer truck for sale |
|
|
|
Traction 4X2,6X4,8X4 |
8X4 |
|
|
|
Power |
336HP |
|
|
Weight Parameter |
Complete Vehicle Kerb Mass(kg) |
15120 |
|
|
|
Maximum authorized total mass (kg) |
31000 |
|
|
Dimension Parameter |
External Dimensions(mm) |
Length (mm) |
10745 |
|
|
|
Width(mm) |
2496 |
|
|
|
Height(mm) |
3190 |
|
|
wheelbase(mm) |
1800+3800+1350 |
|
|
|
Drum Volumetric |
14 cubic |
|
|
|
Drum Thickness(mm) |
6 |
|
|
Performance Parameter |
Maximum Speed(km/h) |
75 |
|
|
|
Turning diameter(m) |
16 |
|
|
Recommended Configuration |
Engine |
Engine Type |
WD615.69 |
|
|
|
Rated power (kW)/Rev(r/min) |
247/2200 |
|
|
Transmission |
Manual operation, 10 forward & 2reverse with no synchronizer |
|
|
|
Axle |
Front Axle Payload(kg) |
|
|
|
|
Rear Axle Payload(kg) |
|
|
|
Fuel Tank(L) |
||
|
|
Track(mm) |
||
|
|
Front overhang/rear overhang(mm) |
||
|
|
Tire |
||
|
Cabin |
Standard cab with One sleeper, with 4-point support fully floating suspension and shock absorbers, with air conditioner |
||
|
OTHER |
ABS |
||
|
|
COLOR |
||
Notes for New Vehicle Run-in
1. The run-in distance is set to be 2500 km. Before running in, conduct a routine check of the concrete mixer truck to ensure that the vehicle is in normal working condition.
2. After starting the engine, do not accelerate immediately. Wait for 3 to 5 minutes. After the normal operating temperature is reached, you can increase the engine speed.
3. It is strictly prohibited to shut down the engine in the state of warming car. You have to wait for 3 to 5 minutes before shutdown.
4. During the run-in period, the vehicle should run on flat roads.
5. You should shift the gears timely. Smoothly engage the clutch. Avoid sudden acceleration and emergency braking.
6. Before going up the slope, shift into the low speed level. But note that do not let the engine work at very low speeds.
7. In the first 3000km driving distance of the new vehicle, the vehicle load should not exceed 70% of the rated load. The lubrication and maintenance cycle should be shortened in the break-in period.
