Longer Life 50000hrs 360 Degree Mignon bulb Liquid Cooled LED Bulb High CRI, no flicker
Description:
Liquid Cooling Technology
LED technology for light bulbs has some serious technical challenges. Due to the fact that light bulbs have physical constraints on their size, it is difficult to solve the heat problem caused as a by-product of light production. This is particularly important when it comes to higher wattage LED light bulbs. The results of poor heat dissipation lead to poorer light output and lower life expectancy as well as other defects.
Traditional LED bulb light technical limitations:
Traditional LED bulb light has been relying on traditional aluminum fin solve the heat dissipation problem of LED, this creates a hard to avoid problems, using aluminum finned heat ball steep light only emit light Angle of less than 180 degrees, the rest of the dark areas are in the shadow of the aluminum fin, so that the ball steep light reflected by the spherical light was strangled, the ball bubble is used for crystal lamp or other decorative lighting lamps and lanterns is difficult to realize the value of his beautiful, plus a lot of ball steep light of lamps and lanterns is up installation way, makes the need lighting area beneath a massive dark space, can only rely on the wall below the reflection light need lighting area, practicality.
Aluminum finned heat dissipation structure for the single form of heat, in order to control the LED chip junction temperature, must be from the chip to the thermal conductivity of aluminum fin surface channel, but the combination of various materials and produced a lot of thermal resistance, make the limited channels for the construction of the performance of thermal conductivity, thermal conductive channel between the links to the real cost will be increased, and the effect is not very good, some ball steep light in the form of light pillar to realize the three-dimensional light type, and this in turn leads to the thermal channel narrow, in order to achieve the spherical light, further reducing the volume of the heat sink, make this a form of light bulb although realized three-dimensional light type, but its junction temperature of LED chip is very serious, the light attenuation is very quick, violates the practical value of LED energy saving and long life.
The technical features of liquid-cooled bulb lamp:
In order to solve the LED ball steep light to realize in the true sense of high photosynthetic efficiency, long life, such as spherical light has the practical value of the property requirements, use LED light source manufacturing experience for many years, our company invest a lot of effort, finally solve the technology problem of LED bulb light, take light liquid of thermal conductivity of the company's patented technology, realized the application of the LED ball steep light, the fluid is an insulator, there is no cause of parts in contact oxidation, and the refractive index of liquid and the transmission of light is wonderful, for the LED light output and improve the color rendering index play a key role, the lamp shell internal special liquid filling this practice, can make the LED ball steep light type and traditional incandescent lamp as light, and perfectly solve the problem of the LED chip heat dissipation, making the whole lamp longer life, a real finished LED ball steep light light type stereo, beautiful shape, long service life.
By using the principle of liquid cooling, liquid without aperture fill light body all the internal space, makes the cooling channels broad directly, and there exists no problem of uneven hot channel interface, LED the overall soaked in the liquid inside, the omni-directional conduct heat to the liquid, the liquid is heated to above movements on the surface of the water molecules will leave after heating, the heat to send out into the air, lamp shell surface after cooling of water molecules will decline to underside of the lamp shell, because the liquid itself under stationary state heat conduction ability is poor, so the aluminium column lamp body internal heat quickly transferred to the upper liquid to the position of the lower part of the lamp body temperature low, accelerate again to complete the circulation of the liquid, so the flowing liquid its heat conduction ability is greatly better than that of metal finned heat capacity, a process which is a physical process of convective motion, without having to take power, as long as LED bulbs start the cycle will repeat work, to ensure the LED junction temperature of the chip is in a very low level, ensure the service life of the LED chip.
Liquid Cooled: The Last replacement bulb you’ll ever have to buy.
LED Liquid cooled Light Bulb with many advantages:
Cooling technology: all liquid cooling system
360°globular light, Incandescent quality light
Instant start, no flickering, Unbreakable, radiation-free
Long lifespan >50,000 hours
High PF, PF>0.5
Insulating, inflame retarding, non-toxic, non-corrosion, safe and environmentally friendly liquid
Environment Temperature: -5555
High diffusion PC shell, well sealed, moisture-proof
Application:
Application Petroleum chemical plant, gas stations, coal, shipbuilding, such as the use of dangerous goods warehouse environment.
Specification:
|
Power Consumption |
4W |
|
Replacement |
40-watt incandescent bulbs |
|
Bulb Dimensions |
40*80(mm) |
|
Net Weight |
50g |
Electrical
|
Input Voltage |
110V/220V Optional |
|
Frequency |
50-60Hz |
|
Power Factor |
0.5/0.9 Optional |
|
Bulb Type |
LED |
Optical
|
Color Temperature |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
About HiSupplierUser GuideFeatured Partners:
Follow Us:
Channel: madeinchina.hisupplier.com - hebei.hisupplier.com - ningbo.hisupplier.com Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español IPR Protection Policy - Terms of Use - Privacy Policy - Security Measures Copyright © HiSupplier.com Online Inc. All Rights Reserved. 
|
