Rechargeable Underwater Wide Beam Angle Light Multi 4 Color With LED Camera
QUICK DETAILS:
W40VR is multi-functional diving photographing light with white, red, purple and UV high-power LED. With brightness of 2600 lumens, light angle of 120°and max run-time over 5 hours, this professional video light can be used in various underwater environment.
LIGHT PERFORMANCE:
- Model NO.:W40VR
- IP Rating:IP68
- Certification:CCC, CE, FCC, RoHS, CE, RoHS, SGS and Ipx8
- Emitting Color:White/red/purple/UV
- Application:Professional Diving ,Underwater 100m
- Model:2600 Lm New Video/Photo light
- LED:CREE Xm-L U2 LED*10
- Switch 1:red light-purple light- UV light-OFF
- Switch 2:white light-high-low-SOS-OFF
- Battery:32650 Li- Ion Battery *1
- Operation Voltage:2.8V to 4.5V
- Waterproof:100 Meters Underwater
- Waterproof Standard:Waterproof 100m Underwater
- Export Markets:Global
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
LIGHT SOURCE
- Brightness:White light:2600lumens
- Red light:200lumens
- Purple light:6W
- UV light:6W
- Bulb: White CREE XM-L U2 LED *4 (max 2600 Lumens);
- Red CREE XP-E N3 LED*2 (620nm)
- Purple light x 2 wave length:410nm
- UV x 2 length:365nm
ON/OFF
Push the button switch to turn it ON.
MODES CHANGING
- Successive push the switch 1 ON-OFF within two seconds to cycle through Red, Purple, UV Light, OFF.
- Successive push the switch 2 ON-OFF within two seconds to cycle through High, Medium, Low (white light), OFF.
BATTERY INSTALLATION
- Remove the tail by turning counter-clockwise.
- Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
- Mount the tail by turning clockwise.
BATTERY CHARGING
- Plug the charger in the wall power socket, the indicator light is green in the free-load status.
- Put the battery in the slot of the charger.
- The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
- Take out the fully charged battery and use them in the diving light.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.
