Types of Barite Grinding Mill:
_ five models: HGM80, HGM90, HGM100, HGM125and HGM1680L_finished production fineness: 250meshes-2500meshes, 5-74 micron_the capacity (ton/hour) ranges from 0.4T/H to 30T/H Application of Barite Grinding Mill:
Barite grinding Mill also is named Barite mill, Barite grinding machine,Barite grinding plant, is suitable for grinding Barite into fine powder.
Barite grinding Mill is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.The purpose of the micro powder grinding millis for super-fine grinding materials with hardness less than 9 in Moh's scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds.
Structure Of Barite grinding Mill
Barite grinding Mill Production line: consists of hammer crusher, bucket elevator, storage hopper, vibrating feeder, main unit, inverter classifier, cyclone collector, pulse deduster system, high pressure positive blower, air compressors and electrical control systems.
Work Principle of Barite Grinding Mill:HGM series barite grinding mill mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder. After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the grinding mill is at work, the main bearing and each dial are driven by electromotor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers. The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.
Features of barite grinding mill:
High EfficiencyUnder the same finished final size and the same motor power, the capacity of barite grinding mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.Long lifecycle of spare partsThe ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.High safety and reliabilityAs no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.High fineness, flexible adjustmentThe final fineness of the grinding materials can be adjusted between 250 meshes and 2500 mesh (74-5 micron), and the product fineness can reach D97≤5μm.Environment-friendlyThe application of pulse bag filter and muffler greatly alleviates dust pollution and noise.Advanced intelligent speed control deviceConvenient adjusting, more uniform particle size.
Main specification of barite grinding mill:
Model | HGM80 | HGM90 | HGM100 | HGM125 | HGM1680L |
Ring Diameter(mm) | 800 | 900 | 1000 | 1250 | 1680 |
Ring Number (PCS) | 3 | 3-4 | 4 | 4 | 4 |
Roller Number(PCS) | 18-21 | 24-29 | 28-36 | 30-44 | 30-40 |
Main Shaft Speed (r. p. min) | 230-240 | 200-220 | 180-200 | 135-155 | 120-130 |
Input Size (mm) | ≤10 | ≤10 | ≤15 | ≤15 | ≤20 |
Finished Size (um/mesh) | 74-5 (200-2500) | 74-5 (200-2500) | 74-5 (200-2500) | 100-6 (150-2000) | 100-9 (150-1500) |
Capacity (t/h) | 0.4-4.5 | 0.6-6.5 | 1-9 | 2-16 | 3.8-30 |
Outlet Size L*W*H (m) | 13.9*4*6.2 | 14.7*4.8*7.2 | 18*4.6*8.6 | 14*9*10.25 | 26.3*7.5*11.9 |
Shanghai Clirik Machinery Co., LTD
Should you have any questions, please do not hesitate to contact me.
Phone: 0086-21-20236178 008613917147829
E-mail: sales@clirik.com
http://www.baritegrindingmills.com
http://www.clirik.com
http://www.limestonegrindingmill.in
http://www.carbonblack-process.com
http://www.gypsumgrindingmill.in
http://www.calciumcarbonategrinding.com
