Rubber / Stone Silicone Sealant Weather Resistance For Glass Joint
Features
1, Single component, neutral curing, high modulus, fast curign speed.
2, Good adhesive capacity on many base material, having excellent weatherability and resistance.
3, Can be applied in any season and easy to apply.
4, High bonding strength, non-corrosive, have a strong seal with the majority of
construction materials.
Application
1. For installation and sealing of various windows and doors.
2. For gap filling and bonding of architectural decoration, glass, aluminum, wood,
brick, ceramic, etc.
3. Most of the materials sealing, and other multi-purpose assembly.
Colors white, black ,grey, transparent, and any requested colors .
Construction Guide:
1, Must use solvents such as toluene or acetone, keep the interface clean and dry.
2, As to the use of a primer to enhance its adhesion, when the primer is dry before construction. 3, Construction application of sealant joints completely filled, ensure a double faced adhesive. Taped the protection of sites in need, but make sure the tape not to touch the surface of construction will be.
3, Before the gum is solidified, trimming immediately, in order to achieve the beautiful appearance.
Restrictions:
When the surface of the material at the temperature above 40 , can't be constructed using the sealant; cannot be used as structural adhesive; not in the wet surface construction; cannot be used for oil or oil leakage surface; cannot be used directly in the new cement concrete surface.
Specification:
|
NO. |
Item |
Data |
|
1 |
Material |
silicone |
|
2 |
Density (g/cm3) |
0.94 |
|
3 |
Capacity movement |
±30% |
|
4 |
Skin form time |
8-10 minutes |
|
5 |
Curing Rate (2mm/h) |
6-10 |
|
6 |
Drying (4mm/h) |
24-28 |
|
7 |
Max. Tensile strength |
1.3 |
|
8 |
Hardness shore A |
22±2 |
|
9 |
Elongation at Break (%) |
≥600 |
|
10 |
Modulus Mpa (100%) |
0.55 |
|
11 |
Application temperature |
-20°C to 40°C |
|
12 |
Temperature resistance |
-50°C to 100°C |
|
13 |
Weatherproof |
OK |
|
14 |
Under water adhesive |
OK |
|
Skin drying time and fully drying time under: 23°C and 50% humidity |
||
Safety
Silicone sealant will release volatile compound so that it could be harmful to health, therefore, please keep good and ventilate; Silicone sealant will not release any harmful substance and not be harmful to health after cured; Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash off with running water and consult a doctor;
Warranty
As an ISO9001-2015, ISO14001 certified company, we are committed to establish and implement the ISO9001 Quality Management System. We will sign the Quality Guarantee with customers after they buy our products and confirm the construction organization and engineering.
Maintenance
Generally there is no need to repair. If the seal joint is damaged, please remove the damaged silicone sealant, clean the surface of substrates, and fill up with silicone sealant.
KAYA silicone sealants have good adhesion to cured sealant.
