Product brief
This product is a fully synthetic cutting fluid,widely used in ferrous metal grinding and cutting. It is Yellow green transparent liquid.
Product features:
1,It is a transparent liquid, composed of various kinds of synthetic anti-rust agent, lubricant, additives.
2,Good lubrication, cooling, cleaning and anti-rust performance
3,Non-toxic, no smell, does not stimulate the skin,long-term use
4,Excellent rust prevention, to provide online protection for machine tools and machining parts, long-term use, no corrosion to paint of machine tool,will not produce discoloration phenomenon
5, Compared to emulsion liquid,cooling performance significantly,good stability,long service life
6,Suitable for all kinds of grinding machine, cutting roughing and semi-finishing.
7,Life cycle: 3 ~ 6 months
Technical parameters
|
Item |
Quality index |
Test method |
|||
|
Original solution appearance,15~35
|
Yellowish-green liquid |
GB/T6144 5.2 |
|||
|
Diluent(5%) |
Defoaming ability mL/10min |
≤2 |
GB/T6144 5.6 |
||
|
pH |
9.010.0 |
GB/T6144 5.5 |
|||
|
Corrosion test,full immersion,55±2
|
First grade grey casting iron |
24 |
GB/T6144 5.8 |
||
|
T3 Red copper |
24 |
||||
|
H62 Brass |
24 |
||||
|
Anti-rust test |
First grade grey casting iron 35±2 |
single |
24 |
GB/T6144 5.9 | |
Instructions:
1,Recommended concentration: grinding: 3 ~ 5% thinners; Machining: 5 ~ 10% diluents. Use concentration can be adjusted according to processing requirements
2,Preparation methods:use clean water dilute this product,fully stirring,then can be used
3,Use (change)of new fluid method: before using the new liquid,clean the storage tank and piping circulation(with concentration diluent and adding bactericide 0.3 ~ 0.5%),at last add the productt evenly circulation can be used
4,Tank liquid supply or maintenance: when need supply tank need supply,should add water with corresponding percentage of original solution,should clean the oil slick in the tank liquid during use, regularly test PH value of tank liquid, when the PH value is less than 8.5, should supply or change new solution.
Attention:
1,Machine tool should be complete filter, slag system, timely removal of scrap metal, oil slick and other impurities, if not many days to start the machine tool,if machine downtime for a long time,should air circulation and oxygen filling tank on a regular basis.
2,Central fluid feeding and central cooling system,should be detailed operational procedures,that person is responsible for operation.maintenance and management.
3,Mixed with other brand cutting fluid is prohibited
4,This product should be stored in a dry, cool and ventilated inside storeroom, leakage should be avoided in the sun, rain, 5 ~ 35 storage temperature.If improper storage cause the product status changes, restore specified storage temperature after mixing, and then dilute liquid, does not affect the processing performance, can be used normally.
Other matters:
1,Package:25kg/plastic drum,200kg/plastic drum,1000kg/plastic drum
2,Shelf life:two years
