Aluminum alloy 595 x 595mm 40W square Emergency LED Panel Light IP44 100lm / w
Product Specifications:
|
Construction & materials |
||
|
Actual Dimension |
For US market |
For EU market |
|
603*603mm(23.74*23.74inch |
595*595mm(23.43*23.43 inch) |
|
|
Housing |
Extrusion aluminum and Diffused PMMA optical lens. |
|
|
Finish color |
White and silver |
|
|
Lens type |
Frosted |
|
|
Retrofit |
Yes |
|
|
Environmental system |
|
|
Work environment |
Indoor use ( application for dry environment) |
|
Operating temperature |
-2050 |
|
Mercury (mg) |
0 |
|
Optical system |
|
|
Luminous flux |
3800lm @ 4000K, 4000lm @ 6000K |
|
Color temperature |
4000K & 6000K is best seller. |
|
CRI |
82 for 4000K, 83 for 6000K |
|
Spacing criteria |
C0/180:1.26;C90/270:1.23 |
|
Lumen maintence at 6000h |
95% |
|
Lumen Maintenance Factor at Lifetime |
0.75 |
|
Rated peak candelas(cd) |
4000K @ 1300; 6000K @ 1450 |
|
Emergency Luminous Flux (lm) |
1200LM @ 1/3 wattage |
|
Electrical system |
|
|
Input voltage/Current |
100-2770Vac;220-240Vac,50/60Hz |
|
Off state power |
0 |
|
Power consumption |
40W |
|
Power Factor |
0.98 |
|
THD |
15% |
|
Protection |
Class II driver, Class III panel IP20 real/IP40 front |
|
Dimmable |
No |
|
Switching Cycles |
50000 |
|
Start Time (s) |
0.35 |
|
Warm-up time to 60% (s) |
Instant full light |
Description:
1. Bellaid flat LED panel light is a well- Designed for residential and 1. commercial conventional suspended grid ceilings for new construction applications or retrofitting existing fluorescent troffer light fixtures.widely used in offices,hospitals and other professional locales.
2. Huge savings can be achieved along with a significant reduction in maintenance costs making them perfect for use in Offices, Hospitals, Care Homes and Commercial installations.
3. It's equally just as good in your home - especially if you are unable to have recessed lighting installed. Panel lighting is also being widely used by designers for Light Installations or Back Lighting.
4. This 595x595mm LED Panel light is designed to fit into a suspended ceiling with a 600x600mm grid dimension. In this type of installation, the typical application for this LED Panel would be for it to replace a 600x600 trough of 4 x 600mm (2ft) T8/T5 Fluorescent tubes (refer to saving example below).
Features
Save up to 60% energy usage compared to traditional fluorescent fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free
Photometric Information
4000K 6000K
Distribution curve flux:
Illuminance demo:
User Guide Note:
Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.
Unpacking
- Unpack and careful examine the product.
- Report any damage and save all packing material if any parts were damaged during transportation
- Do not attempt to use this apparatus if it is damaged.
Installation instructions
1) Pls remove the protection film on the front of luminaire
- Consult a qualified electrician to ensure correct branch circuit conductor.
