60 x 60cm 50W LED Flat Panel Lighting for home , hotel , office,hospital, high grade application.
Description:
Bellaid flat LED panel is a well-designed & easy to retrofit replacement for standard ceiling tile fittings( ceiling troffer fixture )widely used in offices,hospitals and other professional locales.
Our company LED panel has an outstanding luminous efficacy of 95lm/w achieved by utilizing ultra-bright SMD leds in tandem with Japanese-design reflective materials.
Thanks to its good sink design , Bellaid LED panel has unbelievable low in situation temperature 33,Calculated LM70 lifetime is 66,000h.
Product Specifications:
Construction & materials:
Actual Dimension | 595*595mm(23.43*23.43inch |
Housing | Extrusion aluminum and Diffused PMMA optical lens. |
Finish color | White and silver |
Lens type | Frosted |
Retrofit | Yes |
Environmental system
Work environment | Indoor use ( application for dry environment) |
Operating temperature | -2050 |
Mercury (mg) | 0 |
Optical system
Luminous flux | 3800lm @ 4000K, 4000lm @ 6000K |
Color temperature | 4000K & 6000K is best seller. |
CRI | 82 for 4000K, 83 for 6000K |
Spacing criteria | C0/180:1.26;C90/270:1.23 |
Lumen maintence at 6000h | 95% |
Lumen Maintenance Factor at Lifetime | 0.75 |
Rated peak candelas(cd) | 4000K @ 1300; 6000K @ 1450 |
Emergency Luminous Flux (lm) | 1200LM @ 1/3 wattage |
Electrical system
Input voltage/Current | 100-2770Vac;220-240Vac,50/60Hz |
Off state power | 0 |
Power consumption | 50W |
Power Factor | 0.98 |
THD | 15% |
Protection | Class II driver, Class III panel |
Dimmable | No |
Switching Cycles | 50000 |
Start Time (s) | 0.35 |
Warm-up time to 60% (s) | Instant full light |
Features
Save up to 60% energy usage compared to traditional fluorescent fittings.
Optional built in, surface and suspension mounting kits available.
Class II
High Lumen output
Long life of 40,000h
Slim profile design
Instant start
Negligible UV output
Mercury free
Photometric Information
4000K 6000K
Distribution curve flux:
Illuminance demo:
User Guide Note:
Pls read the entire manual to fully understand and safe usely use this product.
The products anc be used at voltage of 100-277Vac,50/60Hz,suitable for indoor dry environment.
Specifications are subject to change without notice.pls visit www.LED-Panel-lights.com for the most recent user guide versions.
Unpacking
- Unpack and careful examine the product.
- Report any damage and save all packing material if any parts were damaged during transportation
- Do not attempt to use this apparatus if it is damaged.
Installation instructions
1) Pls remove the protection film on the front of luminaire
- Consult a qualified electrician to ensure correct branch circuit conductor.
- The products should be installed and operated by qualified electrician or technician in accordance
- with relevant local codes.
- Rish of electric shock,ensure that main power source is off when wiring or soldering the sections of
- the product.
Maintenance
- Prior to cleaning the product,make sure it has been disconnected from power supply.
- Use a dry or slightly moistened cloth for cleaning
- Never use any chemical or abrasive materials for cleaning.
Installation considerations
- The product must be at a minimum distance of 20cm from any flammable material.
- The product must not be installed into ceilings or wall that contain heat-insulating materials.
Installation steps
- Built-in
- Turn off main power before wring.
- Remove the ceiling panel
- Connect the input and ground wires(bare end) of the driver box to the main power outlet.
- Connect male-female connector tightly on the panel and driver.
- Fix the flat led panel into the ceiling.