Inconel X-750 / UNS N07750 / 2.4669 Nickel Alloy Wire With High Tensile Strength
1. Grade: Inconel X-750
2. Process: VIR - VAR - ESR - Forging - Rolling - Cold Drawing - Finished
3. Delivery Condition: Cold Drawn, Bright Annealed
4. Surface Condition: Bright
5. OD: 0.01-20mm
6. Specification: ASTM, ASME, GB, JIS, GOST, DIN, etc.
7. Packing: Plywood case
|
Alloy
|
% |
Ni |
Cr |
Fe |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
|
Inconel X-750 |
Min. |
14 |
5.0 |
0.7 |
0.4 |
2.25 |
|||||||
|
Max. |
70 |
17 |
9.0 |
1.2 |
1.00 |
0.08 |
1.00 |
0.5 |
0.01 |
0.5 |
1.0 |
2.75 |
Inconel X-750 Characteristic as below
Inconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.
Inconel X-750 Machinability
Conventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Inconel X-750 Corrosion resistance:
Inconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media
Inconel X-750 Application range and field
- Oil and gas production
- Gas turbine engines
- Nuclear engineering
