Standard Model LPG Cylinder Valve with 7 mm Seal Diameter 15KG Capacity
This is our standard valve. Production is biggest, so cheap.
| Product name | LPG Cylinder Valve |
| Model | YSQ-3 |
| Capacity | 15KG |
| Working pressure | 2.5MPa |
| Seal diameter | 7mm |
| Inlet thread | PZ27.8 |
| Outlet thread | M22×1.5-LH |
We will make an accurate price according to your trade terms. Please tell us:
- model or other specification?
- special package and printing?
- quantity?
- EXW (deliver to who), FOB or CIF (which port)?
*******************************
Please don't view the following which is irrelevant message:
Specifications
1) Made of brass, Vernet Probe, Steel Filter and Spring, EPDM Oring
2) Temperature adjust range: 35-45
3) Constant temperature
| |
| DESCRIPTION | | Item No.: | X9321, X9325, X9371, X9373, X9392, X9395 | | Material: | Brass Body, Plastic Handle, Vernet Probe, Steel Filter, Plastic Check Valve | | Color: | Brass | | Assembly Parts: | Plastic Handle + "Vernet" Thermostatic Probe + Brass Body+ SUS304 Filter + SUS304 Spring + EPDM Oring + Plastic Check Valve + PPO Shutter | | Usage: | Pipe Water Valve, Use for Wash Basin, Bidet, Shower | | Packing: | 1PCS / Box, 50PCS / Carton |
| | PARAMETER | | Water Pressure: | Working Pressure: 0.03-1.0Mpa, Recommend Pressure: 0.1-0.5Mpa | | Temperature: | Inlet Cold Water: 5-29°c, Inlet Hot Water: 50-95°c, Mixing Water: 35-45°c, Adjustment Accuracy: ±2°c | | Flow Rate: | 11.67L/min in 1 Bar Water Pressure | | Installation Type: | G1/2", G3/4", G1¼", G1" | | Standard: | (1)EN817 GB/T 18145-2000 {>70,000 cycle}, (2)CSA B125-98 ASSW 1016 {>100,000 cycle} |
|
|
| PRESSURE & FLOW RATE | Pressure
psi / kPa | 1 psi | 5 psi
34kPa | 10 psi
69kPa | 15 psi
103kPa | 20 psi
138kPa | 30 psi
207kPa | Flow Rate
L / Min | 4.5 | 9.0 | 12.5 | 15.1 | 17.6 | 28.2 | | GPM | 0.98 | 2.00 | 2.70 | 3.30 | 3.90 | 6.20 |
|
|
| TECHNICAL | | Dimension | 1/2"
DN15 | 3/4"
DN20 | 1"
DN25 | | Water Pressure | 0.03~1Mpa | 0.03~1Mpa | 0.03~1Mpa | | Recommend Pressure | 0.1~0.5Mpa | 0.1~0.5Mpa | 0.1~0.5Mpa | | Cold Water Temperature | 5~29°c | 5~29°c | 5~29°c | | Hot Water Temperature | 55~95°c | 55~95°c | 55~95°c | | Mixing Water Temperature | 30-60°c | 30-60°c | 30-60°c | | Accuracy | ±2°c | ±2°c | ±2°c | | Preset | 38°c | 38°c | 38°c | | Flow Rate (0.3Mpa) | 15L/Min | 32L/Min | 75L/Min | | Hot & Cold Water Pressure Maximum Ratio | 8:1 | 8:1 | 8:1 | | Connecting Nozzles | 1~2 Pieces | 3~6 Pieces | 10 Pieces |
|
|
| 1. | Tools. (1)Spanner. (2)Screwdriver. (3)Flashlight. (4)Teflon Seal Tape. (5)Drill. (6)Lever Ruler. (7)Roll Ruler. |
| 2. | Installation- All installations should be carried out by a Licensed Professional.
- Please set the water flush pipe before install the faucet, clear the dirty and impurity inside of pipe, to prevent the faucet block in working.
- Install in accordance with markings on valve body. i.e. hot water inlet-marked H, cold water inlet-marked C.
- After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within+/-2C.
- The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.
- If the ratio between two inlets is too large, one flow-limiting valve should be fixed at the side of higher pressure.
- Prior to installation, provisions should be made to flush the piping of any debris or other foreign materials to ensure proper system operation.
|
| 3. | Working Principle- A heat sensor is installed at the water-outlet of the constant temperature mixed water valve, the valve core in the valve body is moved by the temperature sensor to block or open the cold hot water-inlet.
- The hot water opening is increased while the cold water opening is decreased, when the temperature adjusting knob sets a certain temperature, the cold hot water ratio at the water-outlet will be changed as well regardless of the change of the cold water-in or hot water-in temperature, therefore, the constant water-out temperature is ensured.
- In both cases the mixed outlet water temperature is automatically and continually maintained at the preset temperature within the tolerances of the valve.
- In the event of a cold or hot water supply failure, the seat assembly moves to an extreme position shutting off the hot or cold inlet water port. A mechanical adjustment permits selection of the desired outlet water temperature within range of the valve.
|
| 4. | Application- The constant temperature mixed water valve manufactured by our factory specially for the hot water system can be widely used for the electric geyser, solar energy geyser and central heating system.
- The user can adjust the mixed water temperature when needed without being affected by the water temperature, water pressure, when the cold water is broken off, the mixed water valve can close the hot water automatically in a few seconds, which shows the safety protection.
- Point of use mixing for wash hand basins, bidets, baths and showers in hospitals, schools, sport and leisure facilities, prisons and other public buildings.
|
