AV3672A/B/C/D Vector Network Analyzer 10MHz~13.5GHz/26.5GHz/40GHz/50GHz
Product Overview:
AV3672 series Vector Network Analyzer provide multiple calibration types including frequency response, single port, response isolation, enhanced response and full two-port calibrations; offer many display formats such as logarithmic amplitude, linear amplitude, standing-wave ratio (SWR), phase, group delay, Smith chart and poplar coordinates, etc.; are designed with several kinds of standard interfaces: including USB, LAN, GPIB and VGA, available in multifunction parameter testing of mixer/converter, active intermodulation distortion and harmonic distortion, gain compression two-dimensional sweep and pulse network S-parameters, which allows it to accurately measure the amplitude-frequency characteristics, phase-frequency characteristics and group delay characteristics of microwave network.
Main Features:
- Flexible and optional calibration types, compatible with multiple calibration kits
- Multi-window, multi-channel test, fast operation for complex test scheme
- Available in multiple display formats such as logarithmic amplitude, linear
Amplitude, standing-wave ratio (SWR), phase, Smith chart
- With USB, GPIB, LAN and VGA display interface
AV3672D Options
|
Model |
Description |
Remarks |
|
AV3672D-201 |
2-port programmable Step attenuator |
Set two 60dB programmable step attenuators on the source path, two 35dB programmable step attenuators on the receiver path |
|
AV3672D-400 |
4-port test |
Two-source stimulus four-port VNA configuration |
|
AV3672D-401 |
4-port programmable step attenuator |
Set four 60dB programmable step attenuators on the source path, four 35dB programmable step attenuators on the receiver path(option 400 is needed) |
|
AV3672D-008 |
Pulse test |
For pulse S-parameter measurement |
|
AV3672D-S10 |
Time domain test |
For time-domain test to determine the discontinuous location in device, fixture or cable and make analysis |
|
AV3672D-S80 |
Offset frequency test |
For the test of frequency offset, millimeter-wave frequency extension main unit needs this option |
|
AV3672D-S86 |
Gain compression two-dimension sweep test |
For the gain compression two-dimension sweep test of amplifier |
|
AV31123A |
2.4mm calibration kit |
For the calibration of analyzer |
|
FE0BN0BM025.0 |
2.4mm testing cable |
For testing with the analyzer |
|
FE0BN0BL025.0 |
2.4mm testing cable |
For testing with the analyzer |
