Full Glass Carbon fiber tube 1000mm and 10*8mm with The glass fiber and standardizing.
Introduction
- The Carbon Fiber tubes are glass fiber widely used for industries R/C booms, telescopic poles, walking sticks, DSLR rigs etc.
- N.W.:44.86g/pc ,Working Temperature: 80 Celsius Degree or Below
- The 10mm OD×8mm ID×1000mm Length tube is mainly for R/C quadrocopter booms.
- Round Carbon Fiber tubes are Carbon Fiber Epoxy Prepreg Fabric table-rolled outside a mandrel of certain diameter and thermoset at temperature 125 Celsius Degree.
- The mandrel, which is also referred as mould, is then demolded and ground on the Centerless ground machine to ensure the outer diameter tolerance.
- The Carbon Fiber tubes are cut by diamond blade.
Specification
Outer diameter |
10mm |
Inside diameter |
8mm |
Length |
1000mm |
Surface |
3k The glass fiber |
Weave/Pattern Direction |
A one-way |
Applications
The Carbon Fiber tubes aremade of organic fibre by carbonization and graphitization treatment of
microcrystallineink materials.The micro structure of carbon fiberArtificial graphite,Is disorderly layer
of graphite structure.
The Carbon Fiber tubes are a kind of excellent mechanical properties of new materials,
It's less than steel the A quarter, the tensile strength of carbon fiber resin composite materials are
generally in 3500 mpa Above, is a steel 7 ~ 9 Times, tensile elastic modulus Amount for 230 ~ 430 gpa
Also higher than that of steel.so CFRP Than the strength of the strength of the material with the ratio of
the density can be achieved 2000 mpa/(g/cm3) Above, and A3 Than the strength of the steel is only
59 mpa/(g/cm3) Left and right sides, the modulus of than is higher than steel.material
greater than the strength of the component the less weight, higher than the modulus, the greater the,
stiffness of the artifacts, in this sense has been predicted The broad application prospect of carbon fiber
in engineering. Through a variety of new composite materials(Such as polymer composite material, metal
Matrix composites,Ceramic matrix composites)The outstanding performance,Many people expect,
The human on the material used is moving from an era of iron and steel Into an era of composite materials
are widely used.
FAQ
a. Q : Can I have a sample order?
b: Yes,we welcome sample order to test and check quality.Mixed samples are acceptable.
a. Q : What is the lead time?
b: Sample needs 1-3 days,mass production needs 10-15 days,also according to the order volume.
Our Services
1. Customers' Pursuits for Change, Lijin's Motivation for Grow.
2. The main materials we use are all high level in the domestic.
Shipping
1. Normally, the parcel will be shipped out within 3-5 working days after payment is received.
2. And we also make the lower commercial invoice for custom clearing to avoid the big tax according to
most of our customers’ requirement.
Display