Supply large Fiberglass Poles bracket of carbon fiber and carbon fiber mast.
Introduction
(1) Low deformation rate: FRP pultrusion profiles by 1000 h after artificial accelerated aging change in
length is + 0.03%, the width of the rate of 0.07%.Therefore making products with the pultrusion
profiles geometric shapes and sizes can keep the long-term stability.
(2) High heat distortion temperature: pultrusion profiles of the thermal deformation temperature of 186 ,
high temperature softening, 60 the same crisp, to ensure the normal use of various kinds of
ambient temperature.
(3) The bibulous rate is low, bibulous rate is less than 0.5% of ordinary glass fiber reinforced plastic
products, and the bibulous rate of pultrusion profiles is only 0.257%, suitable for use in damp
environment.
(4) Low coefficient of heat preservation and heat insulation: the heat transfer coefficient of pultrusion
profiles with hard PVC close, made of the single frame of the double glass window insulation heat
preservation and heat insulation coefficient of only 2.69 W/(m2K), and with the same type of steel,
aluminum ingot thermal insulation coefficient of window is as high as 4.0 W/(m2K), shows that FRP
doors and Windows of energy saving is obvious.
(5) Strong corrosion resistance: pultrusion profiles by 3% HCI solution soak for 24 h, the hardness
retention rate of 95%.Soaking by 3% NaCl aqueous solution for 24 h, the hardness retention rate
of 89%.Therefore made with FRP pultrusion profiles Windows and doors not only suitable for homes,
hotels, restaurants, and more suitable for the coastal regions and corrosive working environment of
industrial workshop use.
Specification
|
Supply forms |
Build |
|
Inside diameter size |
According to the drawings |
1. Clean water
Clean water rinse is fiberglass pipe wall, but for those who adhere to the calcium and magnesium ions
scale of fiberglass pipe wall, can thoroughly remove impurities such as sticky mud is, the effect is not
obvious.
2. Liquid cleaning
Liquid cleaning is joining chemical reagent in water, but the chemical composition of glass fiber tube
is corrosive, also shorten the service life of fiberglass pipe, is a kind of dry ze and fishing practices, is
not desirable.
3. The physical cleaning
Now in the market, the working principle of this kind of cleaning is basically compressed air as power,
using the transmitter to the glass fiber tube in launching a special projectile is greater than the pipe
diameter, the high speed movement and friction along the pipe wall, the effect of cleaning pipe wall.This
way cleaning effect is apparent, do not have harm to the basic line, is by far the most radical and clean
way.
Display
