Fire Rated Flexible Decorative Stone Tile , The Rinsing Rock
Product Description:
Flexible stone, called color clay, the main raw materials are natural stone powder, natural mineral pigments and other materials, through the environmental protection and scientific fabrication processing, form the flexible green building and decoration materials with natural stone texture.
Product Advantages :
1. Compared with the external wall marble and granite’s dry-hang construction, this product’s construction is more portable and handy, greatly shortened the construction period.
2. It is no harm to people's health when decorate, use, produce and construct , it is green building product.
3. It can be directly pasted on the original wall, which avoided massive eradication of the old wall in the process of old city reconstruction, and saved a lot resources waste.
4. Acid corrosion, high temperature resistance, UV aging.
5. Remarkable tensile strength and peel strength improved the product’s applicability to an excellent state.
6. It can be used for 30-50 years for outdoor use (according to different external environments), and 50 years for indoor use, non-discoloring, according with modern city buildings’ back-to-nature features.
Product Technical Index:
|
Breath-ability , Wet Steam Flow Density g/(h) |
≥0.85 |
|
Frost-Resistance |
After 100 cycles,no surface crack, flake by naked eye observation |
|
Aging Resistance |
3500h, no crack appearance, gas robe phenomenon pulverization is less than level 1 |
|
Combustion Performance |
More than 3mm thickness A Level Less than 3mm,according to the requirements of texture coating |
|
Tensile Strength |
≥1.0MPa |
|
Dimensional Stability |
±0.5% |
|
Stain Resistance |
Smooth product = 4 levelregular concave and convex surface products=3 level |
|
Alkali Resistance |
800h, No blisters, peeling phenomenon, just like stone |
|
Acid Resistance 2% , H |
48h, Normal |
|
Soluble Lead |
≤20 |
|
Soluble Cadmium |
≤5 |
|
TV((mg/kg)(cancerogen) |
≤0.5 |
Product Installation:
1. After basic level processing, setting line, snap the line for positioning.
2. Scrape slurry behind the product, full slurry rate above 80%, pull out jagged lines.
3. Hands moving and pressing, adjust the seam width.
4. Use plastic bag filled of sealant to fill the joints or use silicone adhesive to seal and flap the joints, press with finger is strictly prohibited.
5. When the sealant is semi-dry, use the steel bar to pull a concave joint.
6. Some place polluted by adhesive & sealant, use batch knife to scrape.
7. Use a dry sponge to remove the ash.
8. Construction completed.
Flexible Rinsing Rock Photo:
