Efficient Pressurized Glass Bead Blasting Cabinet 10Kg - 15Kg Initial Media Charge
Specifications:
|
Technical Parameter for TS1212P-A By Manual control |
Dimension |
1200*1200*830mm |
|
Load Capacity |
≤80Kg |
|
|
Loading Weight (kg)(Approx) |
550Kg |
|
|
Control mode |
Manual control |
|
|
Motor for dust collector |
750W AC220V 50Hz |
|
|
1.5~3.6m³/min |
|
|
Air pressure |
0.8~1.2MPa |
|
|
Diameter of blasting hose |
Φ13mm |
|
|
Machine Lighting |
15W AC220V 50Hz |
|
|
Spray Gun Quality |
1/2 pc |
|
|
Initial Media Charge(Approx) |
10~15Kg |
|
|
Power supply |
220V 50HZ |
|
|
Separator |
Yes |
Description:
Pressure Systems utilize a pressure pot that incinerates the media from the pot through the blast hose, to the nozzle. A direct pressure unit has the same amount of pressure in the pressure pot vessel. Passing through the air line, it connects to the outlet of the abrasive metering valve.
Sometimes direct pressure systems are referred to as gravity fed or equal pressure units. Why is this? While the abrasive “free flows” into the air stream, the operator can better control or direct the blasting process at both low and high pressures.
In most applications, work can be done four times faster than with a siphon sandblast cabinet as the abrasive is delivered at a much higher velocity.
Applications:
1. The machine can clear mold , forging and casting parts . welding parts ,heat parts and machine processing work pieces
2. Deal with Rough surface , remove oxide ,residual salt and burr . and also can be used Pretreatment process before spraying ,electroplating except carbide ,polishing treatment
3. This machine also use glass beads ,Silica sand ,and strengthen the surface of light decoration
4. This machine is suitable for medium volume production of single ,small parts
Competitive Advantage:
1. This machine assemble with wheel, very convinent to move.
2. Blast rust, corrosion and paint on large parts in a enclosed cabinet to keep dust off the floor and out of the air.
3. Abrasive media: silica sand, glass beads, silicon carbide, emery, plastic sand, etc.
