16 - 26 Stations Sheet Metal Roll Forming Machines with High Grade 45 # Steel
Sheet Metal Cold Rolling Mills Introduction
Coil Material |
Thickness | 0.8-1.5mm |
Coil width | Custom-made | |
Yield Strength | 250-350Mpa | |
Material | PPGI, GI. | |
Decoiler / Uncoiler | Coil Width | Max. 1250mm |
I.D | 508-610mm | |
O.D | Max. 1500mm | |
Roll Forming Machine | Forming Stations | 16-26 Stations ( Depend on Profiles ) |
Roller material | 45# steel, surface coated with 0.05mm hard chrome | |
Diameter of shaft | 90mm | |
Shaft material | High grade 45# steel | |
Drive type | Chain transmission | |
Forming speed | 0-15m/min | |
Main power | 11KW X 2 | |
Cutting | Cutting type | Hydraulic cutting |
Cutting power | 4KW | |
Cutting Tolerance | 10m+/-1.5mm | |
Encoder | OMRON Brand | |
Electrical control | PLC | PANASONIC Brand or Custom-made |
Inverter | YASKAWA Brand or Custom-made | |
Touch screen | MCGS Brand or Custom-made | |
Operation type | Touch screen & Button | |
Hydraulic Station | Hydraulic station | Famous Chinese brand |
Runout Table | Table type | Simple nonpower type |
Function | To support the finished panels |
Hydraulic Cutting Device
- Stop to cut, Post cut, No Blanking cut
- Pump motor =4.0KW
- Cutting tool material : Cr12, Heat treatment;
PLC Control System
- Control the quantity & cutting length automatically;
- Combined with: PLC, Touch Screen (SIEMENS), Inverter (SCHNEIDER), Encoder (Omron), etc
- Cut-to-length tolerance≤±2 mm
- Control Voltage 24V
- Product Rack Un-powered, 3 units
Machine Composition
- 5Ton * 1250mm Hydraulic un-coiler
- Hydraulic system expand coil inner hole, Pump motor: 3KW
- Frequency Inverter to regulate turning speed, Motor: 2.2KW
- Link-connect expanding system
- Automatic stopping device, Load capacity = Max.5Tons
- Coil Inner-diameter= 510±30mm, Coil width = Max.1250mm
- Dance arm assistance for coil-turning speed control
- Manual Pre-shearing device (Un-powered)
- Smart cut control, to cut off the end of the final piece of sheet onl
Machine Shows
Mannul Decoiler Show