Automatic Continuous Pouring Polyurethane Pu Injection Machine
for Automotive Manuafacture Industry
Configurated with a total of 4 mixing heads (2 iso + 2 polyol), 2 foam heads now + 2 heads in the near future, the type HC-201 series high pressure foaming machine is applicable for ISO and POLY two components. This foaming line can fulfill production requirements of four sets of hydraulic mould carriers.
Mold Temperature 40 –70 C (+/-1 C). The upper and lower tool are both
equipped with a TC. Temperature can be set separately.
Processing Close tool
Output capacity 50-200g/s. The machine shall be able to feed simultaneous 2 tools
Output Ratio 1:5—5:1, it could be adjusted
Pouring time 0.5-99.99s(+/-0.01s)
Pouring control Both Manual and Automatic
Voltage 380V/50Hz
Power 28Kw
Air supply 6 bar
Weight of Machine Around 2800Kg
Metering System
Poly Pump C07 High pressure axial piston pump- Rex
Iso Frequency Motor with transducer Speed 0-1450rpm; Power: 380V/50Hz, 5.5
Poly Frequency Motor with transducer Speed 0-1450rpm; Power: 380V/50Hz, 5.5
Iso mechanical Coupling Shall be installed to avoid Material leakage
Poly mechanical Coupling Shall be installed to avoid Material leakage
Iso Flow rate controller Range:0.5-70L/min, Accuracy: +/-0.5g
Poly Flow rate controller Range:0.5-70L/min, Accuracy: +/-0.5g
Type of Mixing head “ L “Type with self-clean function- DUT
2 efficient adjustable needle nozzles
2 electromagnetic hydraulic valves
2 High/low pressure exchange switch
Output Max pressure 250Kg/m2
Cycle Time 180 seconds maxi including tool cleaning
POLY: 2500MPas
ISO: 1000MPas
Pouring rate: 50~250g/s
Mixing ratio: 5:1~1:5 adjustable
Pouring time: 0.50~99.99s(accuracy 0.01s)
POLY metering unit: 2sets
Metering Pump: A7VKO028MA/10MRSK4P550
ISO metering unit:
Metering Pump QTY: 2sets
High pressure mixing head: 2sets
“L” type piston type mixing head provides self-clean function.
4 effective adjustable needle nozzles
ISO flow meter---2 sets,flow rate range:0.5-70L/min, accuracy±0.5g; it can automatically control output flow rate at both open and close loop mode.
Equipped with: chiller, pressure increasing valve, safety valve, pressure gauge, pressure release valve, visible water level gauge.
Temperature control unit: 2sets
2 sets of chillers to control temperature of material POLY & ISO separately.
Auto refilling system: 2sets
When the day tank is short of material, the gear pump will automatically refill the ISO and POLY material.
To meet the market demands for different regions, we are looking for executives, wholesalers who are professional and passionate in PU foam industry.
OEM / ODM orders are welcomed.
Automatic Continuous Pouring Polyurethane Pu Injection Machine for Automotive Manuafacture Industry
Automatic Continuous Pouring Polyurethane Pu Injection Machine for Automotive Manuafacture Industry
Automatic Continuous Pouring Polyurethane Pu Injection Machine for Automotive Manuafacture Industry
Automatic Continuous Pouring Polyurethane Pu Injection Machine for Automotive Manuafacture Industry
