EPS Wall Sandwich Panel Machine with High Precise Guiding Pressure Reducing Valve Controls
EPS Wall board machine, EPS sandwich wall board making machine, wall panel machine
1. Main feasture:
1).The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature
control, material level control to realize automatic production.
2). With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
3).The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
4).High precise guiding pressure reducing valve controls the temperature and steam pressure of the
closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled
within ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the
bad temperature control.
5).With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
6).The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and
material conveying to silos.
7).Most components are of world-famous brands, with reliable performance, stable quality, long service
life and low maintenance cost.
8).The machine can realize the primary and second expansion
Straw color wave roof tile forming machine can produce pantile with all kinds of
waves and heat-preserving layer, which will be used at the roof as the substitute
of traditional asbestos tile, color steel tile and cement tile. There is asbestos in the
asbestos tile which include carcinogen.
Product features
The product manufactured by this equipment has following features: fireproof,
waterproof, environmental protection and no toxicity, at the same time it is
resistant against acid, alkali and aging. This product can be nailed, planed, sawed
and sticked. In view of that its fireproofing grade is A, so our product will not be
combustible when the fire is 800-1000°C.At the same time, when our product is
fell into the water for a week, there are not the following phenomenon such as
chalking, deformation and warp. In light of there is not glue in the raw materials,
so there is not formaldehyde and benzene for our boards.Rich color and never
fading
Technology features
This machine adopts reverse in-phase running technology.
There is not any requirement about high temperature and high pressure during
production processing. The board will be
formed at one time after rollerextruding under the conditions of normal temperature
and normal pressure. This is a green environmentalprotection project, because
that there is no waste water, waste materials and waste gas during its production
processing. The finished board don’t need high temperature drying, airdrying and
watering, and under the normal temperature, they will dry well indoor.
Equipment Model and Product Specification
According to different production, our equipment has 6 models for large-scale, middle-scale and
smallscale. Our all equipment can produce board with same quality and specification
but different production.Customers can adjust the specification of the pantile
according to different requirements, the standard specification is 1.8mX0.72m,
the biggest length is 6 m, the thickness is 3mm~6mm generally. In addition, this
equipment can produce the pantile with
heat-preserving layer. 
