ML50C-PV 1x50w 0-10V and push dimmable led driver 350mA to 1050mA multi-output 123x79x23.5mm for LED Panel Light
Feature
1, Output current and output voltage can be set by DIP switches, constant output current range from 350mA to 1050mA.
2, Two circuit design AC-DC-DC, no flicckering in dimming 0%-100%
3, Default output current setting: 350mA
4, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface.
5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.
6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.
8, Maximum length of the cable, from switch to last driver is 20m.
9, Factory setting: 100% dimming level and 350mA output.
10, Reset the LED diver easily by a jumper.
11, Press-in terminals in primary and secondary side, easy assembly.
12, Protection: Short circuit / Over voltage / Over temperature.
13, Long life span 50,000h, 5 years guaranty.
Mechanical Specification
Specifications
INPUT
|
Input voltage |
220-240Vac |
Input frequency |
50-60Hz |
|
Input current |
0.26A max |
|
Power factor |
≥0.90 |
|
Efficiency(Note1) |
≥87% |
|
Leakage current |
0.5mA/240Vac |
|
OUTPUT
|
Output current/voltage and load |
350mA 16-60V DC 21W max 500mA 16-60V DC 30W max 550mA 16-60V DC 33W max 650mA 16-58V DC 41W max 700mA 16-58V DC 41W max 750mA 16-56V DC 43W max 850mA 16-56V DC 47W max 900mA 16-56V DC 50W max 1050mA 16-48V DC, 50W max |
Output load range |
1x50W max |
|
Current accuracy |
±5% |
|
Dimming mode |
0-10V, PUSH |
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50 |
Surface temp.(Tc) |
85max |
|
Working humidity |
20~90%RH non-condensing |
|
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|