ML25C-PD 1 x 25w DALI & PUSH DIM led driver multi-output current slim design 150 x 52 x 30mm
Description
1, Dimming load with flickering-free design,flicker rate is less than 2%.
2, Multi-output current 250mA / 350mA / 500mA / 700mA set via dip switches,one driver is applicable for many luminaires,save purchasing cost and inventory qty for customer.
3.Support both DALI and PUSH DIM.
4, Slim size 150 x 52 x 30 mm,esp.for LED Panel light application.
5, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207
6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.
7, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
8, Maximum length of the cable, from push button to last driver is 20m
9, Press-in terminals in primary and secondary side, easy assembly
10, Protection: Short circuit / Over voltage / Over temperature
11, 5 years guaranty
Mechanical Specification
Specifications
|
|
Input voltage |
220-240Vac |
|
Input frequency |
50-60Hz |
|
|
Power factor |
≥0.90 |
|
|
Efficiency(Note1) |
≥85% |
|
|
Leakage current |
0.5mA/240Vac |
|
|
|
Output current and load |
250mA 3-58VDC 350mA 3~58V DC |
|
Output load range |
1x25W max |
|
|
Current accuracy |
±5% |
|
|
Dimming mode |
DALI, PUSH |
|
|
|
Working temp.(Ta) |
-20~50 |
|
Surface temp.(Tc) |
85max |
|
|
Working humidity |
20~90%RH non-condensing |
|
|
Storage temp. |
-40~80 |
|
|
Life time |
≥50000hours |
|
|
|
Isolation class |
Class II, SELV |
|
Protection class |
IP20 |
|
|
Short circuit |
Protection type; auto rest |
|
|
Over voltage |
Protection type; auto rest |
|
|
Over temperature |
Protection type; auto rest |
|
|
|
Safety |
EN61347-1 EN61347-2-13 |
|
EMC |
EN55015, EN61000-3-2ClassC |
|
|
EN61000-3-3, EN61547 |
||
|
DALI interface |
IEC62386-101, IEC62386-102, IEC62386-207 |
|
|
Approvals |
CE |
|
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min |
|
|
|
1, Efficiency is measured at 550mA/55Vdc output set by DIP switch |
|
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.
Wring Diagram
