12mm Safely Protected Copper Ground Rod with Clamp for Iron Tower
|
MODEL |
Copper layer Thickness |
Diameter |
Length of supply |
Packing |
|||
|
Mil |
mm |
Inch |
mm |
Feet |
mm |
pc/bundles |
|
|
CN-G10 |
|
0.254 |
|
10 |
3 |
900 |
20 |
Technical Specification
1) The purity of the copper which used as cladding is more than 99.95%.
2) The steel core is low carbon steel which the carbon content is about 0.15%.
3) The copper bonded ground rod will be capable of being through 90 at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.
4) Good in anticorrosion that usage-life is more than 50 years, constant low resistance and good plasticity which has the characteristics of the pure copper.
5) The earth rod is fully covered with copper cladding without any cracks, holes, cavities etc. Preventing exposure of the steel core to soil and moisture, so as to form a good corrosion resistance.
We can supply threaded rods in all sizes and shapes.
1) Copper Clad Steel Grounding Rod can be made double heads thread, thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
* Special sizes and shapes and copper thickness can be customised according to your demands if you can't find the specification you need in the above table.
Application
The Copper Clad Steel Grounding Rod for lightning system are widely used in power plants, substation, transmission line tower,
communication base stations, airports, railways, all kinds of high-rise buildings, microwave relay station,
the networkcomputer room, grounding,oil refinery, oil depots and other places to anti-static grounding,
protective grounding, working, etc.
