Lightning protection Grounding Electrode / Copper electrical grounding bars
Features:
1. Advanced four dimensional continuous electroplating.
2. Uniform plating over 10mil.
3. Better resist corrosion allowing for a 30-years service life in most soils.
4. The electrical conductivity is more than 20%.
|
MODEL |
Copper layer Thickness |
Diameter |
Length of supply |
Packing |
|||
|
Mil |
mm |
Inch |
mm |
Feet |
mm |
pc/bundles |
|
|
CN-F13 |
|
0.254 |
|
13 |
3 |
900 |
20 |
|
4 |
1200 |
||||||
|
5 |
1500 |
||||||
The product can be widely used in the communications industry, power systems, building systems, military installations, railway systems, broadcasting systems and other equipment industries, the AC and DC work, safely protected, especially suitable for harsh surface environment, corrosion resistance requirements to ground engineering, its market prospect is very broad.
- Thickness of the copper layer is more than 0.254mm(all can be done to your demand)
- The core steel rod shall have a tensile strength of not less than 580Nm/mm2.
- The steel core is low carbon steel, and the carbon content is about 0.15%.
- The purity of the copper using as cladding shall be 99.9% pure copper.
- The Ground Rod will be capable of being through 90 at a maximum radius if 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.
- Good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel.
Technical Specification
1) The purity of the copper which used as cladding is more than 99.95%.
2) The steel core is low carbon steel which the carbon content is about 0.15%.
3) The copper bonded ground rod will be capable of being through 90 at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding.
4) Good in anticorrosion that usage-life is more than 50 years, constant low resistance and good plasticity which has the characteristics of the pure copper.
5) The earth rod is fully covered with copper cladding without any cracks, holes, cavities etc. Preventing exposure of the steel core to soil and moisture, so as to form a good corrosion resistance.
We can supply threaded rods in all sizes and shapes.
1) Copper Clad Steel Grounding Rod can be made double heads thread, thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
* Special sizes and shapes and copper thickness can be customised according to your demands if you can't find the specification you need in the above table.
