Led Light RFID Safety Access Pedestrian SecuritySwing Gate Infrared Swing Gate Barrier
Functions
Our Turnstile can combine with different kinds of access readers,like: RFID Reader&Fingerprint Reader &Coin Machine&Barcode System&ESD Tester Access Control(If you have access control system,you can only purchase our turnstiles,if not, our side will install the access control system for you),except acess system,also can use remote
Electronic Swing Barrier Gate Features
1. Problem-self-checking function.
2. Many options of working ways: Bi-direction card reading; One direction card reading and another no reading; One direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.
3. When power off, arm open automatically and power on again, arm will be held automatically.
4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.
5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.
6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.
7. Flap barrier is with 485 interface for long-distrance control concern.
8. Anti-rush function: If there is no open single, arm will be holding tightly.
9. Stable running with little noise.
Extendable functions
Counter (optional)
The length of the housing (length 1.2m, 1.4m, or 1.6m are optional)
The material of flap arm (organic glass, resin, PVC etc. optional)
The color of the flap arm (red, blue, yellow, colorless, etc.)
Pedestrian Swing Barrier Specification
|
1 |
Power |
AC220C±10V,50HZ |
|
2 |
Operating temperature |
-15°C--75°C |
|
3 |
Relative Humidity |
≤95%, No Condensation |
|
4 |
Arm length |
60~90cm |
|
5 |
Passing Speed |
30~40 persons/min(IC Card) |
|
6 |
Motor |
0.5NM/24V(Fully Automatic) |
|
7 |
Input Connection |
+12V Level Signal or Pulse Wide>100ms DC12V |
|
8 |
Communication Connection |
RS485 Communication Module Standard. |
|
9 |
Material |
SUS304,thickness is no less than 1.3mm |
|
10 |
Protection Grade |
IP54 |
|
11 |
Colour |
SSB(US32D)- Stainless Steel Brushed / Powder Coating(Optional) |
|
12 |
Operation Place |
Subway Station, Hoverport,Tourism Sports,Exhibition, Swimming Hall,Residence Area,Enterprise’s Entrance and Exit Attendance,Gateway Guard,Charge Management,Special Access Control |
FAQ:
