BR-A2D. BW series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. Therefore, the thermal protector will respond to the temperature change. The heat caused by temperature raise will transmit to bimetallic element. Once the preset temperature is reached, the bimetallic element will react and make contactor cut off. Then the circuit will be cut off. Once the motor temperature decreases to the rated recovery temperature, bimetallic element will recover to the initial station. Then the contactor will close and the circuit will reconnect.
Temperature specification
O pen temperature: 50~150±5℃, one gear per 5BR-A2D. BW series thermal protector is an automatic temperature recovery device. It is installed in series with the motor coil. ℃
Reset temperature: it is 2/3 of standard opening temperature or specified by customers. The tolerance is 15℃.
Contact capacity
They are applicable for more than 5000 cycles under following condition.
Voltage | 24V-DC | 125V-AC | 250V-AC |
Current | 12A | 12A | 8A |
Storage
Keep the package material and the part itself from snow, rain and pressure. Air humidity should be less than 90%
Reliable safety thermal wire protector for motors
