Pneumatic Dot Peen Metal Marking Machines with PC Based Controller
Product Description:
HOW DOES THIS MACHINE WORK?
Through to content input to the computer English characters, graphics printing,computer marking
software convert the content to a digital control signal, transmitted to the controller, drive in print
and on the workpiece is composed of continuous playdot matrix characters and graphics; needle
under X Y two dimensional plane according to the trajectory set, also print needle under the
action of the compressed air and on the surface of the work piece to print out the concave mark
is composed of denselattice.
WHY CHOOSE SP3000 DOT PIN MARKING MACHINE
Pneumatic dot pin marking machine has the advantage of deep or shallow mark, both graphics
and text, the product serial number, trademarks, marking after becoming a permanent mark on
long, generally marked workpiece weight of less than about 1600(10 5mm high character
calculation), can choose pneumatic marking machine and if the amount is very large, selected
laser marking machine or electric corrosion marking machines, moreover is all kinds of large
heavy work pieces marking, often need to remote operation marking, pneumatic marking
machine is the first choice, and price moderate, can be equipped with notebook computers,
easy to carry. In addition,pneumatic marking and can be easily integrated in the industrial
production line, we hit the header is designed into a small, sturdy, easy to install. From the plastic
to the most hardened steel (max. 65HRC), they can point the needle marking at very high speed
all material. The controller can automatically increment the serial number, date, the working group
and the marking icon, OCV font or 2-D recognition code Data Matrix.
PARAMETER
| Marking speed | 3-8characters(2x2mm)/s |
| Stroke Frequency | 300times/s |
| Marking depth | 0.1 to 1mm (Vary to the material) |
| Marking contents | Alphanumeric info, Data Matrix or dot matrix 2D codes, Shift codes |
| Barcode, Serial Number, Date, VIN Code,Time, Letter, Figure, Logo, | |
| Graphics and etc. | |
| Stylus Pin Hardness | HRA92/HRA93 |
| Marking area | 140x80mm ,200x80mm,200x100mm(customized support) |
| Dimensions | 340mm×440mm×700mm |
| Marking materials | below HRC60 metallic and nonmetallic materials ,above HRC60 need |
| special stylus | |
| Repeat accuracy | 0.02-0.04mm |
| Power | 300W |
| Work voltage | AC 110V 60HZ or AC220V 50HZ |
| Compressed Air( Pneumatic Air) | 0.2-0.6Mpa |
| Connection | 2 USB and RS-232 |
CAN THIS MACHINE MARK LOGO, NUMBER, TEXT,AND ETD
Yes,of course we can.This machine can mark everthing you want .
Any character size 0.5 mm to 100 mm
