WAV4-… series rotary actuator and WCBS… series ball valve. Equal percentage flow characteristic guarantees the valve performances of stability. Control ball valves are widely used in HVAC system, heating system, water treatment equipment, and water running control in industrial automation, such as: AHU, flesh air-handling unit, differential pressure control unit and heat exchanger for flow regulation and on/off control.
Application
HVAC system
Heating system
Water treatment system
Industrial equipments
Operational mode
Winner control ball valve is motor-operated by a type of WVA4-1…, WAV4-2…, and WAV4-3… actuator. The actuator is controlled by a modulating on/off , 3-piont or proportional control system and move the ball of the valve, to the opening position dictated by the control signal.
Technical data
Valve body:
Medium: cold/hot water, with 50% glycol Temperature of medium: 2°C...90°C
Rated pressure: PN20 Pipe connector: internal thread
Ambient temp. range: −5…+60°C;0…90%RH Size: 1/2'' ~ 2''
Valve type: 2-way and 3-way Flow characteristic: equal percentage
ACTUATOR:
Power supply: 230VAC, 24VAC/DC
On-Off time: 50~90S
Angle of rotation: 90°
Manual handle available
Protect rank: IP54
Material
Valve body:
Valve body: forged brass, Hpb59-1 Seal: ball: EPDM+PTFE
Ball: stainless steel brass Stem: EPDM
ACTUATOR:
Cover: PC
Rotating shaft: PA66
Valve body tabel
Model No. | DN(mm) | Inch | Valve type | Kvs(m3/h) | △Pvmax (MPa) | △Ps (KPa) |
WCBS215 | DN15 | 1/2" | 2 way | 6.3 | 0.6Mpa | 1400 |
WCBS220 | DN20 | 3/4" | 2 way | 6.3 | 0.6Mpa | 1400 |
WCBS225 | DN25 | 1" | 2 way | 10 | 0.6Mpa | 1400 |
WCBS232 | DN32 | 11/4" | 2 way | 16 | 0.6Mpa | 1400 |
WCBS240 | DN40 | 11/2" | 2 way | 25 | 0.6Mpa | 1400 |
WCBS250 | DN50 | 2" | 2 way | 43 | 0.6Mpa | 1400 |
WCBS315 | DN15 | 1/2" | 3 way | 4.0 | 0.6Mpa | 1400 |
WCBS320 | DN20 | 3/4" | 3 way | 6.3 | 0.6Mpa | 1400 |
WCBS325 | DN25 | 1" | 3 way | 10 | 0.6Mpa | 1400 |
WCBS332 | DN32 | 11/4" | 3 way | 16 | 0.6Mpa | 1400 |
WCBS340 | DN40 | 11/2" | 3 way | 25 | 0.6Mpa | 1400 |
WCBS350 | DN50 | 2" | 3 way | 43 | 0.6Mpa | 1400 |
Actuator
Model No. | Voltage | Actuator type | Output torque | Consumption | Valve body |
WVA4-104 | 230VAC±10% | On/off or 3-piont | 4N.m | 12VA | DN25,DN20,DN15 |
WVA4-106 | 6N.m | 6VA | DN50,DN40,DN32, | ||
WVA4-110 | 10N.m | DN50 | |||
WVA4-204 | 24VAC/DC±15% | On/off or 3-piont | 4N.m | 3VA | DN25,DN20,DN15 |
WVA4-206 | 6N.m | 6VA | DN50,DN40,DN32, | ||
WVA4-210 | 10N.m | DN50 | |||
WVA4-304 | 24VAC/DC±15% | 0(2)-10VDC | 4N.m | 3VA | DN25,DN20,DN15 |
WVA4-306 | 0(2)-10VDC&4-20mA | 6N.m | 6VA | DN50,DN40,DN32, | |
WVA4-310 | 0(2)-10VDC&4-20mA | 10N.m | DN50 |
○ Optional feedback resistances or feedback Micro travel switch.
.jpg)
.jpg)
