Fast Cutting Speed Stainless Steel Laser Cutting Machine with Easy Maintenance
Description:
Competitive Advantage:
Laser cutting advantages over other thermal cutting methods
1. Good cutting quality:
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better
cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of
cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can
be used as the final working procedure, parts can be even used directly without mechanical processing.
(3) Heat affected zone is very small, material performance is hardly affected near the kerf width , and the
workpiece deformation is small. Also, kerf geometry is good , slitting rectangular cross-section shapes
appear to be regular.
2. Highly automation:
Adopts digital control, you only need to use CAD to draw the picture and import to specialized software, laser
cutting machine can cut out the artifacts you need, moreover there is intelligent typesetting function, thus can
save raw material costs to the greatest extent.
3. High cutting efficiency:
Due to the transmission properties of laser, laser cutting machine has equipped with many sets of CNC work
bench to realize numerical control. You only need to change the CNC program to cut different shape, as well as
for two-dimensional cutting, and three-dimensional cutting.
4. Fast cutting speed:
The cutting speed can be up to 600 cm/min when using 1200W laser to cut 2mm low carbon steel plate, and can
up to 120 m/min when cutting 5mm polypropylene resin plate. Material does not need clamping fixed for cutting,
thus can save the jig and auxiliary time for material upload and download.
5. Non-contact cutting:
There is no contact for work piece and laser head, so there is no tool wear. No need to change "tool" for different
shapes parts processing, only need to change the output parameters. Laser, low noise, small vibration, and no
pollution while cutting.
6. Variety cutting material:
Compared with oxyacetylene cutting and plasma cutting, laser can cut many kinds of materials, including metal,
nonmetal, metal and nonmetal based composite material, leather, wood, fiber, etc. But for different material, it
shows different laser cutting adaptability due to its thermal physical properties and different laser absorption rate.
Specifications
|
Model |
GS-LFDS4020 |
|
Laser source medium |
Fiber |
|
Cutting range(L*W) |
4000 mm × 2000 mm |
|
Z axle stroke |
120 mm |
|
Max. positioning speed |
120 m/min |
|
X, Y axle Max. accelerate speed |
1.2 G |
|
Cooling form |
water cooling |
|
Laser wavelength |
1070nm |
|
|
1000W / 1500W / 2000W 2500W / 3000W / 4000W (Optional) |
|
Min. cutting gap |
≤ 0.1 mm |
|
Positioning accuracy of X, Y and Z axles |
± 0.03 mm |
|
Repeated positioning accuracy of X, Y and Z axles |
± 0.02 mm |
|
Thickness of cutting material (according to material) |
0.2-25mm |
|
Drive model |
Imported servo motor |
|
Power requirement |
380V,50/60Hz |
|
Working temperature |
5-45 |
|
Continuous working time |
24 Hours |
|
Machine weight |
About 11570Kgs |
|
Total protection level of power supply |
IP54 |
Description:
Competitive Advantage:
Laser cutting advantages over other thermal cutting methods
1. Good cutting quality:
Because of the small laser spot, high energy density, fast cutting speed, laser cutting can therefore get better
cutting quality.
(1) Cutting knife is narrow and parallel on both sides, also perpendicular to surface, dimensional accuracy of
cutting pieces can be up to + / - 0.05 mm.
(2) Cutting surface is smooth and beautiful, the surface roughness is only a few dozen microns, laser cutting can <
