Lower Running Cost Sheet Metal Equipment Plate Cutting Machine by Fiber Laser
Specifications
|
Model |
GS-LFDS6020 |
|
Laser source medium |
Fiber |
|
Cutting range (L * W) |
6000 mm × 2000 mm |
|
Z axle stroke |
250 mm |
|
Max. positioning speed |
120 m/min |
|
X,Y axle Max. accelerate speed |
1.2G |
|
Cooling form |
Water cooling |
|
Laser wavelength |
1070nm |
|
Output power of laser source
|
1000W / 1500W / 2000W 2500W / 3000W / 4000W (Optional) |
|
Min. cutting gap |
≤ 0.1 mm |
|
Positioning accuracy of X, Y and Z axles |
± 0.03 mm |
|
Repeated positioning accuracy of X, Y and Z axles |
± 0.01 mm |
|
Thickness of cutting material (according to material) |
0.2 - 25 mm |
|
Drive model |
Imported servo motor |
|
Power requirement |
380V, 50/60 Hz |
|
Working temperature |
5-45 |
|
Continuous working time |
24 Hours |
|
Machine weight |
About 12130 Kgs |
|
Total protection level of power supply |
IP54 |
Description
Advanced fiber laser cutter
Air and waterway system :
The gas path of the fiber laser cutting machine has two parts, the part of the cutting of gas supplied to the cutting
head , and a clean and dry compressed air and high purity oxygen . Another part of the auxiliary gas, all clean,
dry compressed air . Including the gas used in the gas cylinder .
For compressed air users if a unified gas source , you do not have to choose the air compressor , otherwise it
should be optional air compressor , gas from the compressor to enter after the gas tank and the cold and dry air
control cabinet , after a sophisticated air handling system,into a clean,dry gas,is divided into two , all the way as
the cutting gas , all the way to the use of gas as the cylinder . Use pressure from the the corresponding regulator
to adjust .
The cutting gas is divided into three gases: nitrogen, oxygen and air, and these three gases can freely choose
through the electromagnetic valve.Which nitrogen is mainly used for cutting stainless steel and aluminum; oxygen
is mainly used to cut carbon steel ; air metal cutting , the machine has a the air cutting sheet technology , greatly
reduces the processing costs for customers . Want to use different cutting gas for different materials . In addition ,
cutting gas system inside the pressure sensor is installed to ensure that the machine able to stop in time when gas
pressure is not enough work to avoid the cutting part of the void . Setting the pressure threshold can be
adjusted
by the upper portion of the pressure sensor screws .
Fiber laser cutting machine waterway system mainly consists of two parts : one part is out of the cooling water
from the chillers , two routes into the laser , and all the way into the laser host part of its cooling ; all the way into
the laser electric control box part , be cooling; chiller loop back ;
Application:
1. Can cut metal sheet/carbon steel/stainless steel/aluminum/copper/zinc
2. Petrochemical industry
3. Bus manufacturing
4. Steel construction
5. Medical equipment
6. Fitness equipment
7. Electrical engineering
8. Kitchen ware industry
9. Advertising brand
10. Precision machinery
11. Pipe processing
12. Metal processing
13. Sheet metal industry
